SHAFT G 5P6572 - Caterpillar

2. Remove ring (1) and seat (2) from the selector linkage.3. Remove the right floor plate.4. Remove the four bolts and nuts that hold the selector lever. 5. Remove cotter pin (10), cover (3), spring (4), cover (5), seal (6), cover (7), gasket (8), plate (9), gasket (11) and plate (12).Install Speed And Directional Selector Lever
1. Put grease on the ball and pin of the lever, and assemble the plates, gaskets, covers and spring on the lever. 2. Put the lever assembly in position on its mounting bracket (2) with the lever tilted forward. Install the nuts and bolts (1).3. Install the floor plate. 4. Install seat (3), retaining ring and grease fitting in the linkage.