SHAFT 5T1859 - Caterpillar

Illustration 1 g00644787
Manually check the oil level by using dipstick (1) that is located on each swing drive motor.Note: The two rear swing drive motors are located between the swivel joint and the main control valve. The front swing drive motor is located in front of the main control valve. Perform the same procedure for all three swing drive motors.
Remove dipstick (1) .
Illustration 2 g00665963
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
Check the dipstick. Maintain the oil level between the marks on the dipstick. Add oil through the dipstick tube, if necessary.Oil that is badly contaminated or deteriorated should always be replaced. This can occur more frequently than the recommended maintenance interval. Refer to Operation and Maintenance Manual, "Swing Drive Oil - Change" in order to change the oil.
Clean the dipstick and insert the dipstick.
Check the dipstick again.
Reinsert the dipstick.