SHAFT ASSEM. 5V4827 - Caterpillar

Illustration 1 g00304481
The display shows a time of "10:29".Turn the disconnect switch to the OFF position or remove the batteries in order to reset the clock to "1:00". The following two methods can be used in order to adjust the clock.
In order to change the setting for the hour, simultaneously press switch (1) for the boom priority mode and alarm cancel switch (4). In order to change the minutes, simultaneously press power mode switch (2) and alarm cancel switch (4). When you push the switches, the unit of time advances by one increment. Hold down the switches in order to continuously change settings.
When you hold down alarm cancel switch (4), press AEC switch (3). This sets the clock to "00" minutes. If the time that is displayed is 30 minutes or less, the clock will display the preceding hour. If the time that is displayed is more than 30 minutes, the clock will display the succeeding hour.