SHAFT 6D0070 - Caterpillar

6D0070 SHAFT Caterpillar parts 14E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6D0070
6D-0070
6D0070

Weight: 9 pounds 4 kg.

Buy SHAFT 6D0070 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 6D0070:

MOTOR GRADER 14E Caterpillar

Number on catalog scheme: 25

For full view, you need register

Information:

Illustration 13 g06084197
Install four plate assemblies (22), eight brackets (23), sixteen hard washers (24), and sixteen bolts (25).
Illustration 14 g03351085
Clean the mating surface of the wheel ring free of wax, dirt, debris, paint, and grease.
Illustration 15 g03349498
(C) 138-7574 Link Bracket
(5) 6V-8237 Washer
(6) 7X-0851 Nut
(7) 8X-1433 Ring
Illustration 16 g03681129
(B) 194-7586 Pneumatic Wrench Gp, 194-7886 Drive Extension, and 4C-6723 Socket
(C) 138-7574 Link Bracket
(5) 6V-8237 Washer
(6) 7X-0851 Nut
(7) 8X-1433 Ring
Use Tooling (C) and a suitable lifting device to install ring (7). Install 70 hard washers (5) and 70 nuts (6).Note: Do not apply any lubricants to the faces of the washers and the threads of the bolts.Note: Align the notches that are on the rim assembly and the wheel ring.
Use Tooling (B) to tighten 70 nuts (6) to a torque of 1000 125 N m (738 92 lb ft).
Illustration 17 g03349703
(13) 251-6360 Hose Assembly
Install hose assembly (13).
Illustration 18 g03681125
(4) Tire and Rim
Use a suitable tire handler to install tire and rim assembly (4). The weight of tire and rim (2) is approximately 6200 kg (13669 lb)Note: The weight of the tire and rim can vary between 5000 kg (11023 lb) and 6200 kg (13669 lb) depending on the tire and rim configuration.
Illustration 19 g03681119
(B) 194-7586 Pneumatic Wrench Gp, 194-7886 Drive Extension, and 4C-6723 Socket
(8) 6V-8237 Hard Washer
(9) 8T-0669 Bolt
Install 72 hard washers (8) and 72 bolts (9). Use Tooling (D) to tighten 72 bolts (9) to a torque of 900 100 N m (664 74 lb ft).Note: Do not apply any lubricants to the faces of the washers and the threads of the bolts.
Illustration 20 g03349707
(13) 251-6360 Hose Assembly
(14) 281-0569 Hose Assembly
Illustration 21 g03349726
(13) 251-6360 Hose Assembly
(14) 281-0569 Hose Assembly
(15) 5T-9866 Locknut
(16) 6J-0427 Spacer
(17) 7J-5931 Bracket
(19) 5T-9866 Locknut
(20) 5P-1076 Hard Washer
(21) 8T-6868 Bolt
Pull hose assembly (13) and hose assembly (14) through the wheel ring. If necessary, use a wire to pull the hose assemblies through.
Install locknuts (15), spacers (16), bracket (17), locknuts (18), hard washers (19), and bolts (20).