SHAFT 6P2267 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     6V-3182     Cleaning Brushes     1    Start By:
Remove the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01275063
Mark the orientation of bonnet (1) to the aftercooler housing for assembly purposes. Remove zinc rod (2). Remove bolts (3). Remove bonnet (1) .
Illustration 2 g01275074
Remove O-ring seal (4) .
Illustration 3 g01275069
Mark the orientation of bonnet (6) to the aftercooler housing for assembly purposes. Remove bolts (5). Remove bonnet (6) .
Illustration 4 g01275076
Remove O-ring seal (7). Remove seal (8) for the divider.
Illustration 5 g01275190
Note: Do not hold the aftercooler in the vertical position. In the vertical position, the aftercooler core may slide out of the aftercooler housing.
Carefully remove aftercooler core (9) from the aftercooler housing. Support aftercooler core (9) at all times during the removal process.
Illustration 6 g01275194
Remove O-ring seals (10) from each end of aftercooler core (9) .
Illustration 7 g01275198
Remove seals (11) from aftercooler core (9). If necessary, clean debris from aftercooler core (9) .
Illustration 8 g01276140
Use Tooling (A) in order to clean deposits from tube assemblies (12) .