6T7130 SHAFT Caterpillar parts
517, 527, 561H, 561M, 578, 583R, 587R, 589, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H
Rating:
Alternative (cross code) number:
CA6T7130
6T-7130
6T7130
CA6T7130
6T-7130
6T7130
Weight: 0.15 pounds 0 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compatible equipment models: 6T7130:
Information:
Assembly Procedure
Engine Mounted Oil Filter Base
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01364553
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Note: Certain applications will be equipped with engine oil filters. Refer to Operation and Maintenance Manual, Engine Oil and Filter - Change.
Position adapter (10) and O-ring seal (9) on engine oil filter base (1) (if equipped).
Install cover (15) and O-ring seal (13) on engine oil filter base (1). Tighten cover (15) to a torque of 70 10 N m (52 7 lb ft) (if equipped).
Install O-ring seal (11) onto connector (14) (if equipped).
Install connector (14) on adapter (10) (if equipped).
Install elbow (17) and O-ring seal (16) on cover (15) (if equipped).
Install cover (12) and O-ring seal (8) on engine oil filter base (1) (if equipped).
Install relief plungers (2) and springs (3) on engine oil filter base (1).
Install plugs (5) and O-ring seals (4) on engine oil filter base (1).
Install plugs (6) and O-ring seals (7) on engine oil filter base (1).Remote Oil Filter Base
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01364554
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install drive screw (32).
Install elbows (24) and O-ring seals (25).
Install covers (20) and gaskets (21) on engine oil filter bases (23).
Install engine oil filter bases (23) and gaskets (21) on oil filter adapter (26).
Install plug (28) and plug (29) on oil filter adapter (26).Note: If necessary, install the relief plunger, the spring, and the cover in both engine oil filter bases (23).
Install spring (30) and relief plunger (31).
Install cover (27).
Install sampling valve (19) and dust cap (18).
Install studs (33) on engine oil filter bases (23).
Install engine oil filters (22).End By:
Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Engine Mounted Oil Filter Base
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01364553
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Note: Certain applications will be equipped with engine oil filters. Refer to Operation and Maintenance Manual, Engine Oil and Filter - Change.
Position adapter (10) and O-ring seal (9) on engine oil filter base (1) (if equipped).
Install cover (15) and O-ring seal (13) on engine oil filter base (1). Tighten cover (15) to a torque of 70 10 N m (52 7 lb ft) (if equipped).
Install O-ring seal (11) onto connector (14) (if equipped).
Install connector (14) on adapter (10) (if equipped).
Install elbow (17) and O-ring seal (16) on cover (15) (if equipped).
Install cover (12) and O-ring seal (8) on engine oil filter base (1) (if equipped).
Install relief plungers (2) and springs (3) on engine oil filter base (1).
Install plugs (5) and O-ring seals (4) on engine oil filter base (1).
Install plugs (6) and O-ring seals (7) on engine oil filter base (1).Remote Oil Filter Base
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01364554
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install drive screw (32).
Install elbows (24) and O-ring seals (25).
Install covers (20) and gaskets (21) on engine oil filter bases (23).
Install engine oil filter bases (23) and gaskets (21) on oil filter adapter (26).
Install plug (28) and plug (29) on oil filter adapter (26).Note: If necessary, install the relief plunger, the spring, and the cover in both engine oil filter bases (23).
Install spring (30) and relief plunger (31).
Install cover (27).
Install sampling valve (19) and dust cap (18).
Install studs (33) on engine oil filter bases (23).
Install engine oil filters (22).End By:
Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
4P3538
SHAFT-THROTTLE
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 211B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, ...
120H, 120H ES, 120H NA, 135H, 135H NA, 206B, 211B, 213B, 214B, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, ...
2P1170
SHAFT AS-GEAR
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 225, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B,...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 225, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B,...
6I1345
SHAFT AS-OIL PUMP
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 350, 515, 517, 5...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 350, 515, 517, 5...
8N3088
SHAFT AS-THROTTLE
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 215B, 225, 229, 229D, 235, 235B, 235C, 235D, 3204, 330, 330 FM L, 330...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 215B, 225, 229, 229D, 235, 235B, 235C, 235D, 3204, 330, 330 FM L, 330...
8M7836
SHAFT AS-CONTROL
571G, 578, 583R, 587R, 589, D6C, D7G
571G, 578, 583R, 587R, 589, D6C, D7G
6P6739
SHAFT-PLANETARY
589, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637B, 637D, 637E, 637G, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836...
589, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637B, 637D, 637E, 637G, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836...
3T4011
SHAFT AS-PLANETARY
572R, 572R II, 578, 583R, 587R, 587T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, PL87
572R, 572R II, 578, 583R, 587R, 587T, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, PL87
6Y6931
SHAFT AS
578, 583R, 587R, D7H, D8N, D8R
578, 583R, 587R, D7H, D8N, D8R
2022380
SHAFT AS-INPUT
517, 527, 561M, 561N, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM
517, 527, 561M, 561N, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM
8E5001
SHAFT AS
589, D8L, D9N
589, D8L, D9N
6T4189
SHAFT AS
589, D10N, D8L, D9L, D9N
589, D10N, D8L, D9L, D9N
8E5002
SHAFT AS
589, D10N
589, D10N
8P7833
SHAFT
589, D8L
589, D8L
7T8337
SHAFT
589, D8L, D9L
589, D8L, D9L
9T4987
SHAFT
583R, 589
583R, 589
8J3669
SHAFT
578, 583R, 589, 854G, 8D, D10, D11N, D11R
578, 583R, 589, 854G, 8D, D10, D11N, D11R
9T4989
SHAFT
583R, 589
583R, 589
9P9203
SHAFT
589, D10, D8L, D9L
589, D10, D8L, D9L
3T1380
SHAFT
589
589
7G3036
SHAFT
517, 527, 561H, 561M, 578, 583R, 587R, 589, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H, D9L, D9N, D9R
517, 527, 561H, 561M, 578, 583R, 587R, 589, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H, D9L, D9N, D9R