SHAFT 7C7846 - Caterpillar

Illustration 9 g01173862
Remove retaining ring (16) .
Use a soft faced hammer in order to free the bearing from the carrier assembly. Remove output shaft (17) from the carrier assembly.
Illustration 10 g03210717
Remove seal ring (18) from output shaft (17) .
Use a suitable press to remove bearing (19) .
Illustration 11 g01173864
Remove bolts (20) and impeller (21) .
Illustration 12 g03210736
Reposition impeller (21) .
Remove retaining ring (22) and stator (24) from carrier shaft (23) .
Illustration 13 g03211156
Remove spacer (25) from impeller (21) .
Illustration 14 g01173872
Use a suitable press to remove carrier shaft (23) from impeller (21) .
Illustration 15 g03211176
Remove bolts (26) and drive gear (27) .
Illustration 16 g03211197
Remove bearing (28) from impeller (21) .
Illustration 17 g03211199
Remove seal ring (29) from carrier shaft (23) .
If necessary, remove locating dowel (30) .
Illustration 18 g03211217
Remove ring (31), retaining ring (32), and cover (33) from housing (34) .
Illustration 19 g03211218
Use Tooling (C) in order to remove retaining ring (35) .
Illustration 20 g03211220
Remove spacer (36) and O-ring seal (37) .
Illustration 21 g03211721
Turn the housing onto the opposite side and remove turbine assembly (38) .
Illustration 22 g03211725
Remove bolts (39) in order to separate turbine (40) from hub (41) .
If necessary, remove locating dowel (42) .
Illustration 23 g03211726
Remove bearing (43) .