SHAFT-STUB 7N7057 - Caterpillar

Hook up four inlet air connections to mating pipes under hood enclosure using four clamps (24).
Illustration 11 g06031437
See Table 6
Install water tank lines group (7). Install water tube (32) using mounting bracket (31), U-bolt clamp (38), and support clip (37). Install tube (47) using clamp (36). Torque the first U-bolt fasteners to 15 3 N m (11.06 2.21 lb ft). Torque the second U-bolt fasteners to 28 7 N m (20.65 5.16 lb ft).
Table 6
432–5393 Lines Group - Water
Number Qty Part Number Part Name
31 1 424-4431 Bracket As
32 1 426-2183 Tube
33 1 426-4114 Connector As
34 2 5P-4116 Hard Washer
35 2 178-3620 Strap
36 3 220-3246 Clamp
37 1 242-6099 Clip
38 1 305-7098 U-Bolt
39 4 344-5674 Nut
40 2 4D-9517 Clip
41 2 5K-9660 Clip
42 5 8T-4121 Hard Washer
43 1 8T-4136 Bolt
44 2 8T-4137 Bolt
45 4 9X-2488 Hose Clamp
46 2 8T-4186 Bolt
47 13 cm 349-6237 Hose
Illustration 12 g06031563
(40) 4D-9517 Clip
Install water tank overflow hose. Fasten hose to frame using two clips (40) and fasten hose to tube (32) using two straps (35).
Illustration 13 g06033966
(45) 9X-2488 Hose Clamp
Install turbo water vent hoses with clamp (45) on front turbos.
Illustration 14 g06033944
(45) 9X-2488 Hose Clamp
Install turbo water vent hoses with clamp (45) on rear turbos.
Illustration 15 g06031589
(41) 5K-9660 Clip
(45) 9X-2488 Hose Clamp
Hook up two cooling water hoses from hood enclosure to cooling pack using clamps (45) and support clips (41).
Illustration 16 g06032515
(7) 095-1388 Hose Clamp
Connect muffler drain hoses from muffler assembly to chassis using two hose clamps (7).
Illustration 17 g06031624
(6) 418-7043 Hood Wiring Gp
Connect wire harness from hood enclosure to machine harness.