SHAFT-PIVOT 7N8785 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
B 138-7573 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01362018
Use Tooling (A) to remove the engine oil filters (8).
Disconnect hose assemblies (2) and (5).
Remove tube assemblies (6) and (7).
Remove tube assembly (9).
Remove bolts (4), the washers, and the nuts.
Attach Tooling (B) and a suitable lifting device to engine oil filter base (3). The weight of engine oil filter base is approximately 27 kg (59 lb).
Remove bolts (1).
Remove engine oil filter base (3).