7T8337 SHAFT Caterpillar parts
589, D8L, D9L
Rating:
Alternative (cross code) number:
CA7T8337
7T-8337
7T8337
CA7T8337
7T-8337
7T8337
Weight: 31 pounds 14 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Related part:
7T8337
SHAFT-STRG BK-YM
4162138
CL
Number on catalog scheme:
12
For full view, you need register
Information:
The Engine Control Module (ECM) detects the following conditions:
The 5 volt supply is greater than 5.16 VDC for more than one second.
The ECM has been powered for at least three seconds.System Response:The ECM sets all of the pressure sensors to the default values below:
Injection actuation pressure 6 MPa (870.2 psi)
The current of the injection actuation driver is set to 40%.
Atmospheric pressure 100 kPa (15.0 psi)
Boost pressure 0 kPa (0.0 psi)
Engine oil pressure 600 kPa (87.0 psi) The ECM will use the default torque map. "DIAG" will be displayed next to the status for all of the pressure sensors on Caterpillar Electronic Technician (ET).Possible Performance Effect:The engine may experience low power when this diagnostic code is active.Troubleshooting:Test Step 1. Perform the following diagnostic procedure: "5 Volt Engine Pressure Sensor Supply Circuit - Test"Results:
OK - STOP
The 5 volt supply is greater than 5.16 VDC for more than one second.
The ECM has been powered for at least three seconds.System Response:The ECM sets all of the pressure sensors to the default values below:
Injection actuation pressure 6 MPa (870.2 psi)
The current of the injection actuation driver is set to 40%.
Atmospheric pressure 100 kPa (15.0 psi)
Boost pressure 0 kPa (0.0 psi)
Engine oil pressure 600 kPa (87.0 psi) The ECM will use the default torque map. "DIAG" will be displayed next to the status for all of the pressure sensors on Caterpillar Electronic Technician (ET).Possible Performance Effect:The engine may experience low power when this diagnostic code is active.Troubleshooting:Test Step 1. Perform the following diagnostic procedure: "5 Volt Engine Pressure Sensor Supply Circuit - Test"Results:
OK - STOP
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
3408, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B, 578, 583R, 587R, 589, C-15, C-16, C15, C18, D10N, D10R, D10...
578, 583R, D8L, D8N, D8R
561M, 572R, D10, D10N, D11N, D5H, D5H XL, D5M, D6E, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D6H, D6H XL, D6H XR, D6M, D6R, D7G, D7G2, D7H, D7R, D8L, D8N, D8R, D9L, D9N, D9R
D8L, D8N, D8R
611, 613G, 615, 615C, 844, 844H, 844K, D8L
824G, 825G, 980G, D10N, D10R, D9L
AD40, AD45, AE40, D10, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, R2900G, R3000H
D10N, D10R, D10T, D10T2, D9L
D10, D10N, D11N, D8L, D9L, D9N, D9R
D10N, D10R, D9L
D10N, D9L
3T2729
SHAFT-TRACK ROLLER
589, D9L
589, D9L
589, D9L
8C6823
SHAFT-LATCH
589, D6H, D7H, D8N, D9N
589, D6H, D7H, D8N, D9N
7G3036
SHAFT
517, 527, 561H, 561M, 578, 583R, 587R, 589, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H, D9L, D9N, D9R
517, 527, 561H, 561M, 578, 583R, 587R, 589, D10N, D11N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H, D9L, D9N, D9R
6T7130
SHAFT
517, 527, 561H, 561M, 578, 583R, 587R, 589, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H
517, 527, 561H, 561M, 578, 583R, 587R, 589, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D6H, D6H XL, D6M, D7H
8E5001
SHAFT AS
589, D8L, D9N
589, D8L, D9N
6T4189
SHAFT AS
589, D10N, D8L, D9L, D9N
589, D10N, D8L, D9L, D9N
8E5002
SHAFT AS
589, D10N
589, D10N
8P7833
SHAFT
589, D8L
589, D8L