SHAFT-STUB 7W3579 - Caterpillar

Illustration 1 g06226300
Table 1
Specification for 251-1490 Tilt Cylinder Gp
Item Qty Part Specification Description
1 1 167-2227 Buffer Seal As Lubricate the sealing lip lightly with the fluid that is being sealed.
2 1 167-2345 U-Cup Seal Lubricate the sealing lip lightly with the fluid that is being sealed.
3 1 225-3293 Wiper Seal Lubricate the sealing lip lightly with the fluid that is being sealed.
4 1 - Before assembly, apply green Loctite Retaining Compound 638 to the wiper seal groove.
5 2 6E-1166 Bearing Bore before assembly is 160.21 0.02 mm (6.307 0.001 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
6 1 3G-5022 Locknut Lubricate the face of nut that contacts face of the piston.
Torque to 10000 1000 N m (7376 738 lb ft).
7 1 508-4115 Piston Lubricate the threads and torque to 800 80 N m (590 59 lb ft).
A 1 502-7031 Cylinder As Bore is 292.15 0.10 mm (11.502 0.004 inch).
B 1 502-7032 Rod As Diameter is 146.000 0.038 mm (5.7480 0.0015 inch).
C 1 145-9900 Head Bore over two lands is 147.05 0.03 mm (5.789 0.001 inch).
8 10 9X-6152 Bolt Torque to 3100 350 N m (2286 258 lb ft).
9 2 147-0169 Bolt Torque to 3100 350 N m (2286 258 lb ft).