SHAFT AS-INPUT 8E9567 - Caterpillar

If the trip point for a shutdown is programmed to activate before the trip point for a warning, the engine will shut down and the warning will not be activated.Integrated Sensing Module (ISM)
The ISM monitors the temperatures of the cylinder exhaust ports, the inlets of the turbocharger turbine, and the outlets of the turbocharger turbines. The ISM also monitors the combustion sensors.If a temperature exceeds an acceptable range, the ISM can initiate a warning or a shutdown. Both of the responses are available for all of the parameters.Note: To initiate the responses, the ISM sends commands to the ECM via the Cat Data Link.The default settings for the parameters are programmed at the factory. To accommodate unique applications and sites, the parameters may be reprogrammed with Cat ET. The screens of Cat ET provide guidance for changing trip points. Use Cat ET to perform the following activities:
Select the available responses.
Program the level for monitoring.
Program delay times for each response.Table 4 lists default examples of the values for the parameters. However, the values may have changed. Use Cat ET to determine the programming for your engine.
Table 4
Default Settings of the Integrated Sensing Module
Parameter Action Default State Security Level
Password Trip Point Range Delay in Seconds Range of the Delay in Seconds
1184–15 High Left Turbo Turbine Outlet Temperature (1)
Warning On Customer 570 °C (1058 °F) 400 to 650 °C (752 to 1202 °F) 10 1 to 1200
1184–0 High Left Turbo Turbine Outlet Temperature (3)
Shutdown 600 °C (1112 °F)
1185–0 High Right Turbo Turbine Outlet Temperature (1)
Warning On Customer 570 °C (1058 °F) 400 to 650 °C (752 to 1202 °F) 10 1 to 1200
1185–0 High Right Turbo Turbine Outlet Temperature (3)
Shutdown 600 °C (1112 °F)
1181–15 High Right Turbo Turbine Inlet Temperature (1)
Warning On Customer 600 °C (1112 °F) 400 to 700 °C (752 to 1292 °F) 10 1 to 1200
1181–0 High Right Turbo Turbine Inlet Temperature (3)
Shutdown 650 °C (1202 °F)
1180–15 High Left Turbo Turbine Inlet Temperature (1)
Warning On Customer 600 °C (1112 °F) 400 to 700 °C (752 to 1292 °F) 10 1 to 1200
1180–0 High Left Turbo Turbine Inlet Temperature (3)
Shutdown 650 °C (1202 °F)
1137-15 through 1151-15 Cylinder High Exhaust Port Temp 15
Warning Off Customer 600 °C (1112 °F) 100 to 1000 °C (212 to 1832 °F) 10 1 to 1200
1137-0 through 1151-0 Cylinder High Exhaust Port Temp 0
Shutdown 650 °C (1202 °F)
5686-15 through 5701-15 Exhaust Port Temp Deviating High (1)
Warning On Customer 50 °C (90 °F) 10 to 500 °C (18 to 900 °F) 240 1 to 1200
5686-0 through 5701-0 Exhaust Port Temp Deviating High (3)
Shutdown Off 100 °C (180 °F) 600
5686-17 through 5701-17 Exhaust Port Temp Deviating Low (1)
Warning On Customer 120 °C (216 °F) 10 to 500 °C (18 to 900 °F) 300 1 to 1200
5686-1 through 5701-1 Exhaust Port Temp Deviating Low (3)
Shutdown Off 400 °C (720 °F)