8K5453 SHAFT ASSEM. Caterpillar parts
815, 966C, 966R
Rating:
Alternative (cross code) number:
CA8K5453
8K-5453
8K5453
CA8K5453
8K-5453
8K5453
Weight: 28 pounds 12 kg.
SOIL COMPACTOR, WHEEL LOADER,
Related part:
8K5453
SHAFT-AS-YM
5065625
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
10 Apr 2018
3256 Hundredths Pounds
CTP: CTP
Caterpillar SHAFT A (8K5453) New Aftermarket By CTP
8K5453 Caterpillar Weight(lbs): 32.50 Length(cm): 95.3000 Width(cm): 17.8000 Depth(cm): 8.9000
8K5453 Caterpillar Weight(lbs): 32.50 Length(cm): 95.3000 Width(cm): 17.8000 Depth(cm): 8.9000
28 Sep 2017
CTP: CTP
8K5453 Shaft A Fits Caterpillar
Warranty
Warranty
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the governor. Refer to Disassembly and Assembly, "Governor - Remove".
Remove the side covers. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in 3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".Note: The air compressor was removed in order to accommodate the engine repair stand.Note: It is not necessary to remove the cylinder head for removal of the camshaft.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing bolt in the flywheel. This is for timing during installation.
Illustration 1 g01007643
Typical example
Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the idler gear.
Illustration 2 g01007645
Remove bolts (4) and camshaft retainer plate (6).
Remove camshaft gear (5) and camshaft (3) from the cylinder block.
Start By:
Remove the governor. Refer to Disassembly and Assembly, "Governor - Remove".
Remove the side covers. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in 3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".Note: The air compressor was removed in order to accommodate the engine repair stand.Note: It is not necessary to remove the cylinder head for removal of the camshaft.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing bolt in the flywheel. This is for timing during installation.
Illustration 1 g01007643
Typical example
Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the idler gear.
Illustration 2 g01007645
Remove bolts (4) and camshaft retainer plate (6).
Remove camshaft gear (5) and camshaft (3) from the cylinder block.
Cat SIS web machinery list:
Parts shaft Caterpillar catalog:
950, 966C
950, 966C, 966R
814, 815, 950, 966C, 966R
814, 815, 816, 824B, 826B, 834, 950, 966C, 980, 980B, 988
528, 966C
815, 966C
814, 950, 966C
814, 950, 966C
814, 815, 950, 966C
528, 815, 966C
814, 815, 816, 966C
950, 966C
5K4298
SHAFT ASSEM.
815, 966C
815, 966C
5J4463
SHAFT
980, 980B
980, 980B
814, 815, 816, 824B, 826B, 834, 950, 966C, 980, 980B, 988
3S9885
SHAFT
980, 980B
980, 980B
3S9870
SHAFT
980, 980B
980, 980B
980, 980B
7K8548
SHAFT
824B, 825B, 826B, 988
824B, 825B, 826B, 988
815, 966C
814, 966C
988
9S2806
SHAFT
824B, 988
824B, 988
5J4464
SHAFT
980, 980B
980, 980B