SHAFT 8N0176 - Caterpillar

Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Improper lifting or tiedowns can allow load to shift and can cause injury and damage.
Refer to Operation and Maintenance Manual, "Specifications" for the shipping weight for your machine.Note: Significant deviations can affect shipping the machine, or significant deviations can affect lifting the machine. Some examples of these deviations are listed below:
Different implements
Additional fuel
Wider track shoes
Tracks with accumulated mudCheck the state and local laws that govern the following load characteristics.
Weight
Width
Length
HeightOn sharp corners, use corner protectors. The crane should be positioned so that the machine may be lifted in a level plane. The spreader bars should be wide enough to prevent contact with the machine.Consult your Caterpillar dealer for shipping instructions for your machine.
Illustration 1 g06305956
Shipping film
Lifting Point
Lifting Point - To lift the machine, locate slings at this position.
Illustration 2 g06305875
Track lifting points
Use properly rated cables and properly rated slings for lifting. Position the slings beneath the front of the track and beneath the rear of the track.Tie Down Point
Tie Down Point - To tie down the machine, attach the tie-downs to the tie down points.
Illustration 3 g06305882
Front tie down point
Illustration 4 g06305883
Rear tie down point
Illustration 5 g06305876
Track tie down points
Tie-down positions
Use the eye of the towing device for the front tie-down.
Use the inside edge of the track shoe for the side tie-downs.
Use the retrieval hitch or the outer edge of the track shoe for the rear tie-downs.Engage the parking brake before you sling the machine. Be sure that the parking brake is engaged before you secure the machine with tie-downs.