SHAFT 8N5998 - Caterpillar

Table 6
Alarm Icons(1)
# Button / Icon Notes
(17) Caution Alarm This icon indicates a low-level alarm to warn that machine is in an avoidance zone.
(18) Stop Alarm This icon appears (flashing) with an Acknowledge alarm and indicates that the machine is to stop and exit the zone that caused the alarm.
(19) Acknowledge Alarm Use this button to silence the alarm now, for this incident. One press silences all concurrent alarms.
(1) Refer to Illustration 18.The low-level Caution Alarm icon (17) warns that a machine is in an avoidance zone as follows:Detect Strategy - The Path region of the machine crosses into a Detect-created Avoidance zone with the "Manned Exclusion" attribute. The icon never flashes. The icon disappears from the Status bar when the Path region of the machine leaves the Avoidance zone completely. Avoidance Strategy - The buffers of the machine, but not the innermost buffer, crosses into a *.cat file Avoidance zone. The icon never flashes. The icon disappears from the Status bar when the machine buffers leave the Avoidance zone completely.The high-level Stop Alarm icon (18) appears on the Status bar, along with an Acknowledge alarm button (19), based on the following:Detect Strategy - The Avoidance region around the machine crosses into a Detect-created Avoidance zone with the Manned Exclusion attribute. The icon flashes and an audible alarm sounds. The icon replaces the preceding Caution alarm icon. The icon disappears from the Status bar when the Avoidance region around the machine leaves the zone completely. Avoidance Strategy - The innermost buffer of a machine crosses into a *.cat file Avoidance zone. The icon flashes and an audible alarm sounds. The icon replaces the preceding Caution alarm icon. The icon disappears from the Status bar when all buffers around the machine completely leave the zone.Proximity Alarms
These are Detect Strategy alarms only.
Illustration 18 g03393376
Proximity alarms on right-hand side of lower Status bar
(19) Acknowledge Alarm button
(20) Caution Proximity Alarm icon
(21) Critical Proximity Alarm icon
(22) Stop Proximity Alarm icon (with Acknowledge Alarm button)
Table 7
Alarm Icons(1)
# Button / Icon Notes
(20) Caution Proximity Alarm The icon appears if the Path region of a Terrain equipped machine crosses into the Path region of another machine.
(21) Critical Proximity Alarm The icon appears (flashing) if the Avoidance region of a Terrain equipped machine crosses into the Body region of another machine. An annunciator sounds. This information is calculated based on positions and vehicle measure ups in the command center software.
(22) Stop Proximity Alarm The icon appears on the Status bar, along with an Acknowledge alarm button, if the Body region of a Terrain equipped machine crosses into the Body region of another machine. An annunciator sounds. Select the Acknowledge alarm button (19) to acknowledge the Stop Proximity situation and to turn off the annunciator.
(1) Refer to Illustration 18.Informational Warning Icons and the PC Speaker Off Button
Illustration 19 g03670664
Informational warning icons on right-hand side of lower Status bar
(23) Speed icon
(24) Speaker button
(25) Mine Model out of Date icon (23) Speed IconThe Speed icon appears or disappears based on the machine speed