SHAFT 8P2435 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-1862     Pliers     1    
B     1P-1864     Retaining Ring Pliers As     1    
E     1P-1863     Retaining Ring Pliers     1    
Illustration 1 g01196381
Lower the temperature of bearing assembly (9) and install bearing assembly (9) .
Illustration 2 g01196384
Raise the temperature of bearing (8) and install bearing (8) onto shaft (6). Use Tooling (E) in order to install retaining ring (7) .
Illustration 3 g01196385
Raise the temperature of gear assembly (1) and install gear assembly (1) .
Illustration 4 g01196386
Use Tooling (B) in order to install retaining ring (5) .
Raise the temperature of race (4) and install race (4) .
Illustration 5 g01287585
Use Tooling (A) in order to position retaining ring (2) onto gear assembly (1). Install gear assembly (1) into plate assembly (3). Use Tooling (A) in order to install retaining ring (2) .End By: Install the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Install".