SHAFT 8P7783 - Caterpillar

(1) Turn housing assembly (3) to make the free movement (backlash) between sector gear and nut gear ... .000 to .006 in.(0.00 to 0.15 mm)(2) Loosen set screw 1/8 turn. Tighten nut (5) to ... 50 5 lb. ft.(6.9 0.7 mkg)(4) Torque for nut ... 42 4 lb. ft.(5.8 0.6 mkg)(6) Torque for nuts on each end of sector shaft ... 450 25 lb. ft.(62.2 3.4 mkg)(7) Move bracket with screw (10) to make clearance between frame and stop when tractor is turned to limits of steering ... .50 .12 in.(12.7 3.0 mm)(8) Torque for jam nut ... 100 15 lb. ft.(13.8 2.1 mkg)(9) Torque for nut ... 100 15 lb. ft.(13.8 2.1 mkg)