SHAFT A. 9B2587 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B 187-2718 Filter Wrench Assembly 1
ZZ 2P-9697 Plug 1
6J-7366 Flared Cap 1
5P-2909 Plug 1
8S-4951 Cap 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Drain the coolant from the auxiliary system. Refer to the Operation and Maintenance Manual.
Illustration 1 g00916981
Remove bolts and remove tube assembly (1).
Illustration 2 g00916983
Remove one oil filter (2) with Tooling (B).
Illustration 3 g00916986
Disconnect hose assembly (3).
Illustration 4 g00916990
Disconnect hose assembly (4).
Illustration 5 g01052312
Remove bolts (5) and remove housing (6).
Illustration 6 g00916995
Loosen nut (7).
Illustration 7 g01050610
Attach Tooling (A) and a suitable lifting device to the auxiliary water pump.
Illustration 8 g01050612
Remove bolts (8) and remove auxiliary water pump (9) with Tooling (A). The weight of the auxiliary water pump is approximately 27 kg (60 lb).