SHAFT-PLANETARY 9G0289 - Caterpillar

Engine: 3306B (S/N: B8D1-UP; 8NS1-UP) 3412 (S/N: 2WJ1-UP; 4BZ1-UP) 3412C (S/N: BAK1-UP; DJN1-UP; 9EP1-UP; TFT1-UP; BCW1-UP; LRY1-UP) 3412E (S/N: TGC1-UP) 3508 (S/N: ZAB1-UP; CNF1-UP; 5PW1-UP; 23Z1-UP) 3508B (S/N: CNB1-UP; ZAD1-UP; 6PN1-UP; 5KW1-UP; BGX1-UP) 3512 (S/N: ZAF1-UP; CMJ1-UP; FDR1-UP; 6WW1-UP; 24Z1-UP; 67Z1-UP) 3512B (S/N: CMC1-UP; BLF1-UP; ZAH1-UP; ZAJ1-UP; BRK1-UP; 8RM1-UP; 6GW1-UP) 3512C (S/N: SBG1-UP) 3516 (S/N: ZAL1-UP; GZR1-UP; 8TW1-UP; GZX1-UP) 3516B (S/N: FDN1-UP; 7RN1-UP; ZAP1-UP; GAR1-UP; PBR1-UP; ZAR1-UP; GZS1-UP; PPS1-UP; GZT1-UP; FDX1-UP; GZY1-UP) 3516C (S/N: SBJ1-UP; SBK1-UP) C15 (S/N: C5E1-UP; C5L1-UP) C9 (S/N: C9E1-UP; X3R1-UP) G3306 (S/N: JCA1-UP) G3406 (S/N: 4FD1-UP; R7E1-UP; 1RK1-UP; KAR1-UP) G3408 (S/N: 6NB1-UP; 6RJ1-UP) G3412 (S/N: R7A1-UP; KAP1-UP) G3412C (S/N: 81Z1-UP; 6ZM1-UP) G3508 (S/N: CPJ1-UP; CPS1-UP) G3512 (S/N: CRN1-UP) G3516 (S/N: 25Z1-UP; ZBA1-UP; 4EK1-UP; CSZ1-UP; ZAZ1-UP) G3516B (S/N: ZBB1-UP; ZBC1-UP) G3516C (S/N: GZZ1-UP) G3516E (S/N: GAS1-UP) G3520B (S/N: GZP1-UP) G3520C (S/N: GZJ1-UP; GZL1-UP; GZM1-UP; GZN1-UP; CWW1-UP) G3520E (S/N: GZG1-UP) C18 (S/N: DKE1-UP)Generator Set: 3406 GEN SET (S/N: 4ZR1-UP) 3406C GEN SET (S/N: 2WB1-UP; C5G1-UP; C8G1-UP; KPS1-UP; 9ES1-UP; LRX1-UP; C2G1-UP) 3456 GEN SET (S/N: CCB1-UP; C3G1-UP; C4G1-UP; CAH1-UP; C2T1-UP; CBX1-UP; C1G1-UP) C15 GEN SET (S/N: C5H1-UP; X4R1-UP) C18 GEN SET (S/N: C6C1-UP; STD1-UP; STM1-UP; EKW1-UP) C32 GEN SET (S/N: SXC1-UP)Power Module: PM3512 (S/N: BNR1-UP)Introduction
This publication contains the information for the installation of the Generator Information Plate.Do not perform any procedures or order any parts until you read this publication. Do not perform any procedures or order any parts until you understand this publication thoroughly.Between 1March 2005, and 10October 2006, inclusive, certain packaged engine generator sets were shipped with incorrect reactance and per unit impedance characteristics printed on the generator information plate.Caterpillar's Technical Marketing Information (TMI) system shall be considered as the one safe source for the generator reactance and per unit impedance characteristics.Note: Reactances and per unit impedances may be used by engineers, contractors, service personnel, maintenance personnel, and others in order to calculate available fault current in an electrical distribution system.
When servicing or repairing electric power generation equipment:
Make sure the unit is either locked out or tagged DO NOT OPERATE.
Remove all fuses.
Make sure the generator engine is stopped.
Make sure all batteries are disconnected.
Make sure all capacitors are discharged.
Make sure residual voltage in the rotor, stator and the generator is discharged.Failure to do so could result in personal injury or death.
Installation of the Generator Information Plate
Check to see if your generator set was packaged between 1March 2005, and 10October 2006. If your generator set was packaged during these dates, refer to Step 1.a if you are a end user. Refer to Step 1.b if you are a Caterpillar dealer.
If end users determine that a new Generator Information Plate is required, contact your Caterpillar dealer.
As dealers determine or are made aware of the need to provide generator reactance and/or per unit impedance information, the dealer's shall first consult with TMI, then compare the TMI data to that printed on the generator information plate. If any discrepancies are noted, dealers may then contact the Application Support Center (ASC) and request a new Generator Information Plate. Please provide the