9P8610 SHAFT-IDLER Caterpillar parts
926, 930R, 931B, 933, 939, D3C III, D4C III, D5C III, IT28
Rating:
Alternative (cross code) number:
CA9P8610
9P-8610
9P8610
CA9P8610
9P-8610
9P8610
Weight: 2 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$41.70
01 Apr 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Shaft 9P8610 New
$29.27
19 Mar 2018
300 Hundredths Pounds
CTP: CTP
9P8610 Shaft Fits Caterpillar 933 939 D5C PAT D5C PATLGP 3 D3C III D4C III
Warranty
Warranty
Number on catalog scheme:
11
For full view, you need register
Compatible equipment models: 9P8610:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A − Loctite Sealant − Gasket 1 Start By:
Remove the fumes disposal group.
Remove the wastegate solenoid.
Illustration 1 g02150327
Remove nut (1). Remove cable straps (2) Disconnect harness assemblies (3). Remove clamp (4).
Illustration 2 g02150381
Remove bolts (5) and remove inlet manifold (6).
Illustration 3 g02150389
Remove clamp (7). Remove bolts (8) and bolts (9). Separate inlet manifold (6) from elbow (11). Separate tube assembly (10) from elbow (11).
Illustration 4 g02150420
Remove O-ring seal (12), wave ring (13), and tube (14). Installation Procedure
Install inlet manifold (6) in the reverse order of removal.
Apply Tooling (A) uniformly to the face of inlet manifold (6) and assemble within 10 minutes of application.
Table 1
Required Tools
Tool Part Number Part Description Qty
A − Loctite Sealant − Gasket 1 Start By:
Remove the fumes disposal group.
Remove the wastegate solenoid.
Illustration 1 g02150327
Remove nut (1). Remove cable straps (2) Disconnect harness assemblies (3). Remove clamp (4).
Illustration 2 g02150381
Remove bolts (5) and remove inlet manifold (6).
Illustration 3 g02150389
Remove clamp (7). Remove bolts (8) and bolts (9). Separate inlet manifold (6) from elbow (11). Separate tube assembly (10) from elbow (11).
Illustration 4 g02150420
Remove O-ring seal (12), wave ring (13), and tube (14). Installation Procedure
Install inlet manifold (6) in the reverse order of removal.
Apply Tooling (A) uniformly to the face of inlet manifold (6) and assemble within 10 minutes of application.
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
920, 930, 930R
920, 930, 930R
910, 920, 930, 930R, 950, 966C, 966R, 980B
508, 518, 518C, 528, 528B, 530B, 920, 930, 930R, 950, 966C, 966R, 980B, FB518
518, 930, 930R
518, 930, 930R
814B, 815B, 824C, 826C, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, G936, IT18B, IT28B
508, 518, 926, 936, D250B, D250E, D250E II, D300B, D300D, G926, G936, IT28, IT28B
910, 916, 926, IT28
926, IT28, IT28B
926, IT28
916, 926, IT18, IT18B, IT28, IT28B
9P8612
SHAFT-GOVERNOR CONTROL
926, 930R, 931B, 933, 939, D3C III, D4C III, D5C III, IT28
926, 930R, 931B, 933, 939, D3C III, D4C III, D5C III, IT28
1060922
SHAFT
D3C III, D4C III
D3C III, D4C III
5G0317
SHAFT
931B, 931C, 933, D3, D3C III, D4B, D4C
931B, 931C, 933, D3, D3C III, D4B, D4C
931B, 931C, 933, 935B, D3, D3C III, D4C
8Y0102
SHAFT
D3C II, D3C III, D4C, D4C III, D5C, D5C III
D3C II, D3C III, D4C, D4C III, D5C, D5C III
8E8770
SHAFT AS
D5H XL
D5H XL
7G7619
SHAFT
931B, 931C, 931C II, 933, D3C, D3C III, D4B, D4C, D4C III
931B, 931C, 931C II, 933, D3C, D3C III, D4B, D4C, D4C III
9P7090
SHAFT AS-OUTPUT
931B, 931C, 931C II, 933, D3C, D3C III, D4B, D4C, D4C III
931B, 931C, 931C II, 933, D3C, D3C III, D4B, D4C, D4C III
910, 916, 926, 926A, 931B, 931C, 931C II, 933, D3C, D3C III, D4B, D4C, D4C III, IT18B, IT28, IT28B
1712081
SHAFT GP-DRIVE
933, D3C III, D4C III
933, D3C III, D4C III
6S3116
SHAFT-BEVEL GEAR
931B, 931C, 933, 935B, 935C II, D3, D3B, D3C III, D4B
931B, 931C, 933, 935B, 935C II, D3, D3B, D3C III, D4B
6S3117
SHAFT-BEVEL PINION
910, 931B, 931C, 933, 935B, 935C II, D3, D3C III
910, 931B, 931C, 933, 935B, 935C II, D3, D3C III