9T3039 SHAFT Caterpillar parts
416, 426, 436
Rating:
Alternative (cross code) number:
CA9T3039
9T-3039
9T3039
CA9T3039
9T-3039
9T3039
Weight: 3 pounds 1 kg.
BACKHOE LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
03 Jan 2019
410 Hundredths Pounds
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar SHAFT (9T3039) New Aftermarket By CTP
9T3039 Caterpillar Weight(lbs): 4.10 Length(cm): 5.0000 Width(cm): 5.0000 Depth(cm): 31.5000
9T3039 Caterpillar Weight(lbs): 4.10 Length(cm): 5.0000 Width(cm): 5.0000 Depth(cm): 31.5000
This part in 2 request:
Show.
This information for suppliers only!
2019-09-11
2016-08-11
Number on catalog scheme:
29
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00590613
Lower the temperature of bearing (11). Use Tooling (A) and a suitable press to install bearing (11) in front adapter assembly (12). Machine the bearing, if necessary. The bore in the bearing must be 75.00 0.06 mm (2.953 0.002 inch) after installation.
Install O-ring seal (13) on front adapter assembly (12).
Illustration 2 g00590612
Install gears (8) and (10) on shaft assembly (1).
Install bolts (9).
Illustration 3 g01254536
Lower the temperature of bearing (5). Align the oil hole in the bearing with the oil hole that is in rear adapter assembly (4). Use Tooling (A) and a suitable press to install bearing (5).
Ensure that bearing (5) does not extend above the surface of rear adapter assembly (4). Machine the bearing, if necessary. The bore in the bearing must be 75.00 0.06 mm (2.953 0.002 inch) after installation.
Install O-ring seals (6) and (7) on rear adapter assembly (4).
Illustration 4 g01254535
Install rear adapter assembly (4) on shaft assembly (1).
Install washers (2) and the bolts.
Install O-ring seal (3) on rear adapter assembly (4). End By:
Install the engine oil and water pump drive. Refer to Disassembly and Assembly, "Engine Oil and Water Pump Drive - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00590613
Lower the temperature of bearing (11). Use Tooling (A) and a suitable press to install bearing (11) in front adapter assembly (12). Machine the bearing, if necessary. The bore in the bearing must be 75.00 0.06 mm (2.953 0.002 inch) after installation.
Install O-ring seal (13) on front adapter assembly (12).
Illustration 2 g00590612
Install gears (8) and (10) on shaft assembly (1).
Install bolts (9).
Illustration 3 g01254536
Lower the temperature of bearing (5). Align the oil hole in the bearing with the oil hole that is in rear adapter assembly (4). Use Tooling (A) and a suitable press to install bearing (5).
Ensure that bearing (5) does not extend above the surface of rear adapter assembly (4). Machine the bearing, if necessary. The bore in the bearing must be 75.00 0.06 mm (2.953 0.002 inch) after installation.
Install O-ring seals (6) and (7) on rear adapter assembly (4).
Illustration 4 g01254535
Install rear adapter assembly (4) on shaft assembly (1).
Install washers (2) and the bolts.
Install O-ring seal (3) on rear adapter assembly (4). End By:
Install the engine oil and water pump drive. Refer to Disassembly and Assembly, "Engine Oil and Water Pump Drive - Install".
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
416, 416B, 426, 426B, 428, 428B, 436, 436B, 438, 438B
416, 416B, 426, 426B, 428, 428B, 436B, M312, M313C
416, 416B, 426, 426B, 428, 428B, 436B
416, 416B, 426B, 428B, 436B
416, 416B, 416C, 416D, 420D, 424D, 426, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, CP-563, CS-531C, CS-531D, CS-533, CS-533C, CS-533D, CS-563C, CS-563D, CS-573C, CS-573D, C...
416, 416B, 416C, 416D, 420D, 424D, 426, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D
416, 416B, 426B, 428, 428B, 436
416, 416B, 426, 426B, 428, 428B, 436, RT50
416, 416B, 426, 426B, 428, 428B, 436, RT50
416, 416B, 426, 426B
416, 426, 428, 436
426, 428
7T4504
SHAFT
65
65
428, 988F, 988F II, D250D, D250E, D300D, D300E, PM-565, RT100, RT50
9R4434
SHAFT AS
426
426
9R4431
SHAFT AS
426
426
9R4441
SHAFT
416, 426
416, 426
9R4751
SHAFT
416, 428, 446
416, 428, 446
416, 426, 428, 436
9R4906
SHAFT AS
426
426
9T3821
SHAFT
65
65
7T1293
SHAFT-PLANETARY
65, 65C
65, 65C