9W2981 SHAFT AS-OUTPUT Caterpillar parts
589, D10N, D9N, D9R
Rating:
Alternative (cross code) number:
CA9W2981
9W-2981
9W2981
CA9W2981
9W-2981
9W2981
Weight: 37 pounds 16 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Number on catalog scheme:
26
For full view, you need register
Information:
"Battery Monitor & Engine Control Voltage"
This parameter is used to determine the voltage trip point. Below this trip point, the Engine Control Module (ECM) will automatically elevate engine idle in order to maintain ideal battery voltage. This feature is used to promote additional battery life. The engine idle will only be increased if the vehicle is stopped and the transmission is out of gear. If these conditions are not met, the engine idle will not be adjusted. This feature will not function when the engine is operating in dedicated PTO mode ("PTO On/Off" switch in the ON position).The recommended setting is 12.2 Volts for a 12 Volt system, and 24.5 Volts for a 24 Volt system.Note: This feature requires the installation of a Neutral Switch on J1/P1. This is terminal 62 (Input 12). Engine speed will only be elevated when the transmission is in Neutral.
Table 1
Minimum Maximum Default
0 Volts 25.5 Volts 0 Volts
This parameter is used to determine the voltage trip point. Below this trip point, the Engine Control Module (ECM) will automatically elevate engine idle in order to maintain ideal battery voltage. This feature is used to promote additional battery life. The engine idle will only be increased if the vehicle is stopped and the transmission is out of gear. If these conditions are not met, the engine idle will not be adjusted. This feature will not function when the engine is operating in dedicated PTO mode ("PTO On/Off" switch in the ON position).The recommended setting is 12.2 Volts for a 12 Volt system, and 24.5 Volts for a 24 Volt system.Note: This feature requires the installation of a Neutral Switch on J1/P1. This is terminal 62 (Input 12). Engine speed will only be elevated when the transmission is in Neutral.
Table 1
Minimum Maximum Default
0 Volts 25.5 Volts 0 Volts
Caterpillar parts catalog:
Parts shaft Caterpillar catalog:
AD40, AD45, AE40, D10, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, R1600, R1600G, R1600H, R1700 II, R1700G, R2900, R2900G, R3000H
D9R, D9T
D9R, D9T
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
D10, D10N, D11N, D8L, D9L, D9N, D9R
D10N, D10R, D10T, D10T2
D10N, D10R
D10N, D10R, D9L
D10N, D9L
589, D10N, D8L, D9L, D9N
589, 834B, AD30, D10N, D10R, D10T, D10T2, D350E, D350E II, D400, D400E, D44B, D550B, D8L, D9L, D9N, D9R, D9T, R2900, R2900G, R3000H
6Y5946
SHAFT-BEVEL GEAR
589, D10N, D8L, D9N, D9R
589, D10N, D8L, D9N, D9R
3T2273
SHAFT-BEVEL GEAR
589, D10N, D8L, D9L, D9N
589, D10N, D8L, D9L, D9N
589, D10N, D10R, D10T, D10T2, D9R, D9T
589, D8L, D9L, D9N
589, D8L, D9L
589, D10N, D9R
589, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 980...
589, D10N, D8L, D9N, D9R
589, 824C, 826C, 834B, 980C, 980F, 980G, 983B, 988B, D10N, D400, D44B, D550B, D8L, D9L, D9N
589, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637B, 637D, 637E, 637G, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836...