AVSPARE.COM
parts catalog

SHAFT, SINGLE B071659 - Caterpillar



B071659 SHAFT, SINGLE Caterpillar parts PS-110, PS-130, PS-180 SHAFT
Rating:
11
Alternative (cross code) number:
CAB071659
B07-1659
B071659
Caterpillar B071659 SHAFT, SINGLE

Buy SHAFT, SINGLE B071659 Caterpillar genuine, new aftermarket tractor parts with delivery
PNEUMATIC COMPACTOR,

Compatible equipment models: B071659:

PNEUMATIC COMPACTOR  PS-110   PS-130   PS-180   Caterpillar
Number on catalog scheme: 4
  
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-7505     Hydraulic Jack     1    Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the power train oil into a suitable container for storage or disposal.
Illustration 1 g00923138
Install Tooling (A) under guard (1). Remove pins (2) and lower guard (1) to links (3) .
Illustration 2 g00923144
Remove clamps (4). Disconnect quick disconnect (5). Position hose assemblies (6) out of the way. Remove bolts (7) and remove bracket (8) .
Illustration 3 g00923770
Remove the bolts and remove tube assemblies (9). Remove bolts (10). Use two people and remove gear pump (11). The weight of gear pump (11) is approximately 27 kg (60 lb).

Caterpillar parts catalog:

Caterpillar parts catalog
PS-180 PNEUMATIC COMPACTOR 7PD00045-UP (MACHINE) POWERED BY 4.236 ENGINE
PS-110 PNEUMATIC COMPACTOR 7MD00051-UP (MACHINE) POWERED BY 4.236 ENGINE
PS-130 PNEUMATIC COMPACTOR 7ND00121-UP (MACHINE)
PS-130 PNEUMATIC COMPACTOR 7ND00001-00120 (MACHINE)
PS-180 PNEUMATIC COMPACTOR 7PD00001-00044 (MACHINE)


Parts shaft Caterpillar catalog:

F170232 SHAFT
PS-110, PS-130, PS-180
F170231 SHAFT, CENTER
PS-110, PS-130, PS-180
F170227 SHAFT ASSY., OUTPUT
PS-110, PS-130, PS-180
F170230 SHAFT, INPUT
PS-110, PS-130, PS-180
63000322 SHAFT, MAIN
PS-110, PS-130, PS-180
E440316 SHAFT, COUNTER
PS-110, PS-130, PS-180
E010118 SHAFT, AXLE
PS-110, PS-130, PS-180
B092169 SHAFT, AXLE
PS-110, PS-130, PS-180
63000322 SHAFT, MAIN
PS-110, PS-130, PS-180
F170230 SHAFT, INPUT
PS-110, PS-130, PS-180
F170227 SHAFT ASSY., OUTPUT
PS-110, PS-130, PS-180
F170231 SHAFT, CENTER
PS-110, PS-130, PS-180
F170232 SHAFT
PS-110, PS-130, PS-180
B071660 SHAFT, DOUBLE
PS-110, PS-130, PS-180
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.