parts catalog

SHANK AS. 3236966 - Caterpillar

3236966 SHANK AS. Caterpillar parts SHANK
Alternative (cross code) number:
Caterpillar 3236966 SHANK AS.

Buy SHANK AS. 3236966 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7640 Stand 2
8S-7611 Tube 2
8S-7615 Pin 2
B 439-3939 Link Bracket As 2
C 154-6184 Forcing Bolt (M 20) 2
D - Loctite 243 - Start By:
Separate the track assembly.
Remove the travel motor.
Illustration 1 g00489826Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the sprocket and the track for the removal of the final drive.
Raise the side of the machine and install Tooling (A) under the frame.
Illustration 2 g00712767
Attach Tooling (B) and a suitable lifting device to final drive (1). The combined weight of final drive (1) and the sprocket is approximately 356 kg (785 lb).
Illustration 3 g01750056Note: Mark the orientation of bolt holes (2) for the travel motor for installation purposes.
Remove bolts (3) from final drive (1).
Illustration 4 g01750093
Use Tooling (C) to remove final drive (1).Installation Procedure
Install final drive (1) in the reverse order of removal.
Apply Tooling (D) to the threads of bolts (3).
Tighten bolts (3) to a torque of 520 70 N m (384 52 lb ft).

Parts shank Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.