AVSPARE.COM
parts catalog

SHANK-RIPPER 4Z9197 - Caterpillar



4Z9197 SHANK-RIPPER Caterpillar parts D11R SHANK
Rating:
60
Alternative (cross code) number:
CA4Z9197
4Z-9197
4Z9197
Caterpillar 4Z9197 SHANK-RIPPER

Buy SHANK-RIPPER 4Z9197 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4Z9197:

TRACK-TYPE TRACTOR  D11R   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:

Removal Procedure
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Remove the belt from the Refrigerant Compressor. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Illustration 1 g01218864
Disconnect harness assembly (2). Remove bolts (1). Disconnect hose assemblies (3). Remove bolts (4) and remove refrigerant compressor (5) .Installation Procedure
Illustration 2 g01218864
Position refrigerant compressor (5) and install bolts (4). Install hose assemblies (3). Install bolts (1). Tighten bolts (1) to a torque of 10 2 N m (88 18 lb in). Connect harness assembly (2) .
Install the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Charge the air conditioning system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.

Caterpillar parts catalog:

Caterpillar parts catalog
D11R Custom Parts Manual Track-Type Tractor 8ZR00001-UP (MACHINE) POWERED BY 3508 Engine


Parts shank Caterpillar catalog:

9F5124 SHANK
120B, 120G, 120H, 12E, 12F, 12G, 12H NA, 130G, 140B, 140G, 140H NA, 14E, 160G, 950
8E8415 SHANK AS-RIPPER
854G, D10N, D10R, D10T, D10T2
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.