SHEAVE 7B1206 - Caterpillar

Illustration 1 g01256037
(1) RAISE position
(2) HOLD position
(3) FLOAT position
(4) LOWER position The hoist control is located to the right of the operator. The hoist control has four positions: RAISE, HOLD, FLOAT and LOWER. The machine should normally be operated with the hoist control in the FLOAT position.The hoist control is connected to the hoist control position sensor which is a pulse width modulated sensor. The hoist control position sensor sends signals to the chassis ECM. The position of the hoist control will energize the appropriate solenoid on the hoist valve. See the hydraulic system System Operation, "Position Sensor (Hoist Control)" for additional information.When the hoist control is released a spring will move the hoist control from the RAISE position to the HOLD position or from the LOWER position to the FLOAT position.