SHEEPSFOOT COMPACTOR ARRANGEMENT 8S9636 - Caterpillar

Recoil compartment oil level must be checked with the tracks installed and adjusted to the correct sag before checking oil level on dipstick (1).(2) Torque for bolts that hold carrier rollers to track roller frame ... 750 80 N m (550 60 lb ft) (3) Put 6V1541 Quick Cure Primer on seals and frame assembly and permit to dry. Then put 7M7456 Bearing Mount on frame assembly bore before seal installation.(4) Torque for bolts that hold idler to bogie ... 1850 150 N m (1360 110 lb ft)(5) Torque for bolts that hold track rollers to bogies ... 750 80 N m (550 60 lb ft)(6) Apply 2P2506 Anti-Seize Compound to cartridge pin bores before installing the cartridge pins. End of cartridge pin with X mark is a larger diameter than the opposite end, and must be installed next to the cap or cover. The X mark must be on top or bottom of the vertical centerline. End marked X must be even with outside surface of major bogie.(7) Torque for the bolts that hold the guide ... 475 50 N m (350 37 lb ft)