SHEET AS 1776113 - Caterpillar

1. Lower the blade to the ground. Remove two bolts (1) and washers from cap (2). Remove cap (2), shims (3) and insert (4) from the ball socket joint. 2. Start the engine. Move the cylinder rod free of the ball stud and insert. Remove insert (5) and shim (6) from the ball stud.3. Repeat Steps 1 and 2 for the ball and socket joint inserts on the right side of the machine.Install Ball & Socket Joint Inserts
1. Be sure that all parts of the ball socket joint are clean prior to installation of the ball and socket joint inserts. 2. Hand pack the ball stud and the ball socket caps with 5P-0960 Multi-purpose Grease.3. Put insert (5) and shim (6) in position on the ball stud. Start the engine. Carefully move the cylinder rod ball socket in position on the ball socket and insert (5). 4. Position insert (4), shim (3) and cap (2) to the ball stud. Install bolts (1) and washers in the cap.5. Repeat Steps 1 through 4 for the ball and socket joint inserts on the right side of the machine.