SHEET AS 1997856 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01245933
Typical example
Install Tooling (A) and a suitable lifting device to hydraulic tank (15). The weight of hydraulic tank (15) is approximately 140 kg (308 lb).
Install hydraulic tank (15) .
Illustration 2 g01245932
Align hydraulic tank (15) and install four bolts (16) .
Illustration 3 g01245928
Connect tube assembly (13). Install four bolts (14) .
Illustration 4 g01245927
Install sensor (12) and connect electrical connector (10) .
Install elbow and coupler (11) .
Illustration 5 g01245926
Connect hose assembly (9) .
Illustration 6 g01245924
Install the O-ring seal on manifold (8). Install manifold (8) and four bolts (7) .
Connect hose assemblies (4), (5) and (6) .
Illustration 7 g01245921
Install mount (3) and four bolts (2). Install two bolts (1) (not shown).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)". For the capacity of the hydraulic tank refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper filling procedure.End By: Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".