SHEET 2402908 - Caterpillar

2402908 SHEET Caterpillar parts 322C, 325C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2402908
240-2908
2402908

Weight: 18 pounds 8 kg.

Buy SHEET 2402908 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2402908:

EXCAVATOR 322C 325C Caterpillar

Number on catalog scheme: 6

For full view, you need register

Information:

Place a mark onto hose assembly (3) and (4) for assembly purposes. Disconnect hose assemblies (3) and (4). Remove bolts (5). Remove relief valve (6).
Illustration 4 g01326035
Remove cover (7).
Illustration 5 g01326037
Remove O-ring seal (8) from cover (7).
Illustration 6 g01326046
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A). Remove bolts (9) evenly until cover (10) touches Tooling (A). Remove bolts (9). Loosen Tooling (A) until all spring tension is released. Remove Tooling (A).
Illustration 7 g01326052
Remove load piston (13), spring (12), and spool assembly (11).
Illustration 8 g01326054
Remove slug (14) from spool assembly (11).
Illustration 9 g01326056
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (B) in order to remove retaining ring (18). Remove retainer (17), spring (16), and ball (15) from spool (11).
Illustration 10 g01326059
Disconnect harness assembly (19). Remove cable straps (20). Remove harness assembly (19).
Illustration 11 g01326185
Place a mark onto hose assembly (21) and mark the location for assembly purposes. Disconnect hose assemblies (21).
Place a mark onto modulating valve (22) and mark the location for assembly purposes. Remove bolts (23). Remove modulating valve (22).
Repeat Steps 11 through Step 12 for the remaining modulating valves.
Illustration 12 g01326213
Remove drains (24) and (26). Remove sensor (25).
Illustration 13 g01326267
Remove bolts (27). Remove plate (28).
Illustration 14 g01326281
Remove relief valve (29).
Illustration 15 g01326294
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove cap (34), spring (33), spacer (32), and valve (31) from body (30).