SHEET AS 2561894 - Caterpillar

FT2752 Seal Installer Assembly
The FT2752 Seal Installer Assembly is made from 2 fabricated parts. A body and a plate must be fabricated. Illustration 4 provides the dimensions for the body. Illustration 5 provides the dimensions for the plate. Put the plate into position on the body as Illustration 6 shows. Weld the plate onto the body.
Illustration 4 g00865157
This illustration shows the dimensions for the body (V) of an FT2752 Seal Installer Assembly. (A) This diameter is 95.38 0.13 mm (3.755 0.005 inch). (B) This diameter is 95.25 0.50 mm (3.750 0.020 inch). (C) This diameter is 128.14 1.40 mm (5.045 0.055 inch). (D) This diameter is 108.0 1.0 mm (4.25 0.04 inch). (E) This diameter is 105.28 0.13 mm (4.145 0.005 inch). (F) This diameter is 70.23 0.13 mm (2.765 0.005 inch). (G) This chamfer is 2.5 0.5 mm (0.10 0.02 inch) by 45 degrees. (H) The maximum radius is 0.13 mm (0.005 inch). (I) This chamfer is 3.0 0.5 mm (0.12 0.02 inch) by 45 degrees. (J) This angle should be between 44 degrees and 46 degrees. (K) This radius is 1.5 0.5 mm (0.06 0.02 inch). (L) This length is 14.122 0.025 mm (0.5560 0.0010 inch). (M) This length is 60.325 0.025 mm (2.3750 0.0010 inch). (N) This length is 95.25 0.50 mm (3.750 0.020 inch). (O) This length is 111.76 0.25 mm (4.400 0.010 inch). (P) This length is 228.6 0.5 mm (9.00 0.02 inch).
Illustration 5 g00865296
This illustration shows the dimensions for the plate (W) of an FT2752 Seal Installer Assembly. (Q) This diameter is 94.0 0.5 mm (3.70 0.02 inch). (R) This diameter is 108.0 1.0 mm (4.25 0.04 inch). (S) This radius is 0.13 mm (0.005 inch). (T) This length is 6.35 0.50 mm (0.250 0.020 inch). (U) This length is 9.53 0.05 mm (0.375 0.002 inch).
Illustration 6 g00865331
This illustration shows the components of the FT2752 Seal Installer Assembly. (V) Fabricated body (W) Fabricated plate (X) Weld the fabricated body (V) to the fabricated plate (W) at three equally spaced places. The length of each weld should be 15 mm (0.6 inch).FT2753 Bearing Installer
Illustration 7 g00865386
This illustration shows the dimensions for an FT2753 Bearing Installer. (A) This diameter is 144.0 0.5 mm (5.67 0.02 inch). (B) This chamfer is 1.5 0.5 mm (0.06 0.02 inch) by 45 degrees in two places. (C) This length is 12.7 mm (0.50 inch).FT2754 Bearing Installer
Illustration 8 g00867830
This illustration shows the dimensions for an FT2754 Bearing Installer. (A) This diameter is 168.9 0.5 mm (6.65 0.02 inch). (B) This chamfer is 1.5 0.5 mm (0.06 0.02 inch) by 45 degrees in two places. (C) This length is 12.7 mm (0.50 inch).FT2756 Sensor Installer
Illustration 9 g00867857
This illustration shows the dimensions for an FT2756 Sensor Installer. (A) This length is 146.0