2680581 SHEET Caterpillar parts
315D L, 318D L, 318D2 L, 319D, 319D L
Rating:
Alternative (cross code) number:
CA2680581
268-0581
2680581
CA2680581
268-0581
2680581
Weight: 8 pounds 3 kg.
EXCAVATOR,
Number on catalog scheme:
1
For full view, you need register
Information:
General Recommendations
Never add coolant to an overheated engine. Engine damage could result. Allow the engine to cool first.
During shipping and storage, the engine must be protected from damage that can be caused by freezing of the cooling system. If the engine is shipped to a site with freezing temperatures and/or if the engine is stored in a location with freezing temperatures, the cooling system must contain antifreeze that will withstand the lowest ambient temperature. Frequently check the concentration of glycol in the coolant/antifreeze. Ensure that the concentration is adequate in order to prevent freezing. Otherwise, the cooling system must be completely drained, including pumps and coolers..For engines in any location, periodically check the concentration of the additives in the coolant/antifreeze. Ensure that the concentration is adequate in order to help prevent corrosion and other harmful conditions.
Never operate an engine without water temperature regulators in the cooling system. Water temperature regulators help to maintain the engine coolant at the proper operating temperature. Cooling system problems can develop without water temperature regulators.
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
After a cooling system has been refilled, monitor the level of the coolant/antifreeze in the expansion tank. Maintain the level above the minimum mark until all of the air has been purged from the system. Then maintain the proper level for normal operation.During normal operation, frequently check the level of the coolant/antifreeze in the expansion tank. If the level is low, add the proper mixture of coolant/antifreeze.For engines in any location, check the concentration of the conditioner in the coolant/antifreeze according to the engine Operation and Maintenance Manual, "Maintenance Interval Schedule". Obtain an S O S coolant analysis (Level 1) or use the appropriate test kit. Ensure that the concentration is adequate in order to help prevent corrosion and other harmful conditions.To further monitor the cooling system, obtain regular S O S coolant analyses (Level 2) according to the engine Operation and Maintenance Manual, "Maintenance Interval Schedule".Recommended Coolant/Antifreeze
Do not use Extended Life Coolant (ELC) with Cat Gas Engines.ELC was not formulated for use in Cat Gas Engines.Do not use heat transfer fluids in Cat Gas Engines.Use only the coolant/antifreeze that is recommended.
Preferred - Cat Natural Gas Engine Coolant (NGEC)Cat coolants have been developed and tested in order to provide the full performance and service life that has been designed and built into Cat cooling systems. Cat NGEC coolant is currently used to fill Cat gas engines at the factory. This coolant is offered by Caterpillar dealers for continued use when the coolant is changed. Consult your Caterpillar dealer for more information on Cat coolants.Alternatively, use Cat Diesel Engine Antifreeze/Coolant (DEAC) or a commercial heavy-duty coolant/antifreeze that meets "ASTM D6210" or "ASTM D4985" specifications.Commercial coolants are, as a group, second choice.Commercial heavy duty coolant/antifreeze can contain either ethylene glycol or propylene glycol. The coolant/antifreeze must contain 200 ppm (parts per million) silicates to 500
Never add coolant to an overheated engine. Engine damage could result. Allow the engine to cool first.
During shipping and storage, the engine must be protected from damage that can be caused by freezing of the cooling system. If the engine is shipped to a site with freezing temperatures and/or if the engine is stored in a location with freezing temperatures, the cooling system must contain antifreeze that will withstand the lowest ambient temperature. Frequently check the concentration of glycol in the coolant/antifreeze. Ensure that the concentration is adequate in order to prevent freezing. Otherwise, the cooling system must be completely drained, including pumps and coolers..For engines in any location, periodically check the concentration of the additives in the coolant/antifreeze. Ensure that the concentration is adequate in order to help prevent corrosion and other harmful conditions.
Never operate an engine without water temperature regulators in the cooling system. Water temperature regulators help to maintain the engine coolant at the proper operating temperature. Cooling system problems can develop without water temperature regulators.
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
After a cooling system has been refilled, monitor the level of the coolant/antifreeze in the expansion tank. Maintain the level above the minimum mark until all of the air has been purged from the system. Then maintain the proper level for normal operation.During normal operation, frequently check the level of the coolant/antifreeze in the expansion tank. If the level is low, add the proper mixture of coolant/antifreeze.For engines in any location, check the concentration of the conditioner in the coolant/antifreeze according to the engine Operation and Maintenance Manual, "Maintenance Interval Schedule". Obtain an S O S coolant analysis (Level 1) or use the appropriate test kit. Ensure that the concentration is adequate in order to help prevent corrosion and other harmful conditions.To further monitor the cooling system, obtain regular S O S coolant analyses (Level 2) according to the engine Operation and Maintenance Manual, "Maintenance Interval Schedule".Recommended Coolant/Antifreeze
Do not use Extended Life Coolant (ELC) with Cat Gas Engines.ELC was not formulated for use in Cat Gas Engines.Do not use heat transfer fluids in Cat Gas Engines.Use only the coolant/antifreeze that is recommended.
Preferred - Cat Natural Gas Engine Coolant (NGEC)Cat coolants have been developed and tested in order to provide the full performance and service life that has been designed and built into Cat cooling systems. Cat NGEC coolant is currently used to fill Cat gas engines at the factory. This coolant is offered by Caterpillar dealers for continued use when the coolant is changed. Consult your Caterpillar dealer for more information on Cat coolants.Alternatively, use Cat Diesel Engine Antifreeze/Coolant (DEAC) or a commercial heavy-duty coolant/antifreeze that meets "ASTM D6210" or "ASTM D4985" specifications.Commercial coolants are, as a group, second choice.Commercial heavy duty coolant/antifreeze can contain either ethylene glycol or propylene glycol. The coolant/antifreeze must contain 200 ppm (parts per million) silicates to 500
Caterpillar parts catalog:
Parts sheet Caterpillar catalog:
3919681
SHEET
318D2 L
318D2 L
3919683
SHEET
318D2 L
318D2 L
3922673
SHEET AS
318D2 L
318D2 L
3921170
SHEET AS
318D2 L
318D2 L
3921199
SHEET AS
318D2 L
318D2 L
3921202
SHEET AS
318D2 L
318D2 L
3921245
SHEET AS
318D2 L
318D2 L
3921249
SHEET AS
318D2 L
318D2 L
3921263
SHEET AS
318D2 L
318D2 L
3968008
SHEET AS
318D2 L
318D2 L
3922674
SHEET AS
318D2 L
318D2 L
3727623
SHEET AS
315D L, 318D L, 319D L, 319D LN
315D L, 318D L, 319D L, 319D LN
2369567
SHEET-RUBBER
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, M325D L MH,...
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, M325D L MH,...
1653120
SHEET
315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 32...
315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 32...
2369440
SHEET
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 324D, ...
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D SA, 324D, ...
2992952
SHEET AS
311D LRR, 312D, 312D L, 315D L, 319D L, 319D LN, 345D, 345D L, 345D L VG, 349D, 349D L
311D LRR, 312D, 312D L, 315D L, 319D L, 319D LN, 345D, 345D L, 345D L VG, 349D, 349D L
3758755
SHEET AS
315D L, 318D L, 319D L
315D L, 318D L, 319D L
2680697
SHEET AS
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
2737766
SHEET AS
315D L, 318D L, 319D L, 319D LN
315D L, 318D L, 319D L, 319D LN
3138080
SHEET
315D L, 318D L, 318D2 L, 319D L
315D L, 318D L, 318D2 L, 319D L
3589741
SHEET
315D L, 318D L, 319D L, 319D LN
315D L, 318D L, 319D L, 319D LN
2680583
SHEET
315D L, 318D L, 319D, 319D L, 319D LN
315D L, 318D L, 319D, 319D L, 319D LN
2680582
SHEET
315D L, 318D L, 318D2 L, 319D, 319D L
315D L, 318D L, 318D2 L, 319D, 319D L