AVSPARE.COM
parts catalog

SHEET AS 3237438 - Caterpillar



3237438 SHEET AS Caterpillar parts 308D SHEET
Rating:
42
Alternative (cross code) number:
CA3237438
323-7438
3237438
Caterpillar 3237438 SHEET AS
Weight: 9 pounds 4 kg.

Buy SHEET AS 3237438 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 3237438:

MINI HYD EXCAVATOR  308D   Caterpillar
Number on catalog scheme: 4
 
  For full view, you need register

Information:

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.Note: Drain all fluids in a suitable container for storage and disposal.
Illustration 1 g00719763
Install O-ring seal (15) onto water pump (14) .
Illustration 2 g00726694
Install the water pump. Install two bolts (13) and install two bolts (12) .
Illustration 3 g00719762
Install fan drive and mounting plate assembly (10). Install three nuts (11) .
Illustration 4 g00719759
Install two bolts (9) .
Illustration 5 g00719756
Illustration 6 g00719754
Install fan assembly (8). Install bolts (7) .
Illustration 7 g00719752
Install inlet elbow (6). Install two bolts (5). Tighten hose clamp (4) .
Install the gasket, elbow (2) and two bolts (3). Tighten hose clamp (1) .End By:
Install the refrigerant compressor. See Disassembly and Assembly, "Refrigerant Compressor - Remove and Install".
Install the alternator. See Disassembly and Assembly, "Alternator - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
308D Mini Hydraulic Excavator GBT00001-UP (MACHINE) POWERED BY 4M40 Engine


Parts sheet Caterpillar catalog:

3531915 SHEET AS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
3531929 SHEET
308D, 314D CR, 314D LCR, 321D LCR
3531929 SHEET
308D, 314D CR, 314D LCR, 321D LCR
3531915 SHEET AS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.