parts catalog

SHEET AS 3237442 - Caterpillar

3237442 SHEET AS Caterpillar parts 308D SHEET
Alternative (cross code) number:
Caterpillar 3237442 SHEET AS
Weight: 2 pounds 0 kg.

Buy SHEET AS 3237442 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3237442:

MINI HYD EXCAVATOR  308D   Caterpillar
Number on catalog scheme: 5
  For full view, you need register


Removal Procedure
Start By:
Remove the alternator. See Disassembly and Assembly, "Alternator - Remove and Install".
Remove the refrigerant compressor. See Disassembly and Assembly, "Refrigerant Compressor - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.Note: Drain all fluids in a suitable container for storage or disposal.
Illustration 1 g00719752
Loosen hose clamp (1). Remove two bolts (3), elbow (2), and the gasket.
Loosen hose clamp (4). Remove two bolts (5) and inlet elbow (6) .
Illustration 2 g00719754
Illustration 3 g00719756
Remove bolts (7) and carefully remove fan assembly (8) .
Illustration 4 g00719759
Remove two bolts (9) .
Illustration 5 g00719762
Remove three nuts (11) and carefully remove fan drive and mounting plate assembly (10) .
Illustration 6 g00726694
Remove two bolts (12) and two bolts (13). Carefully remove water pump (14) .
Illustration 7 g00719763
Remove the O-ring seal (15) from water pump (14) .

Caterpillar parts catalog:

Caterpillar parts catalog
308D Mini Hydraulic Excavator GBT00001-UP (MACHINE) POWERED BY 4M40 Engine

Parts sheet Caterpillar catalog:

3531915 SHEET AS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
3531929 SHEET
308D, 314D CR, 314D LCR, 321D LCR
3531929 SHEET
308D, 314D CR, 314D LCR, 321D LCR
3531915 SHEET AS
308D, 308E CR, 308E SR, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.