parts catalog

SHEET AS 3727621 - Caterpillar

3727621 SHEET AS Caterpillar parts SHEET
Alternative (cross code) number:
Caterpillar 3727621 SHEET AS

Buy SHEET AS 3727621 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Location of the Corrosion Protection Post
C18 SCAC Marine Engine
Illustration 1 g03252916
(1) Bonding connector
(2) Bonding stud
(3) Vessel zinc C32 SCAC Marine Engine
Illustration 2 g03267159
(4) Bonding connector
(5) Vessel zinc
(6) Bonding stud Testing the Voltage Potential
Operate the engine for at least 30 minutes, then stop the engine. Disconnect the engine from the shore power connection. Use a 257-9140 Multimeter and a 244-1536 Cable Group to test the voltage potential from the salt water to the engine. A silver-silver chloride half cell probe is widely available if the Cat tools are not available.
Connect a #8 American Wire Gauge (AWG) cable from the sacrificial anode to the bonding system of the vessel.
Test the voltage at the bonding stud.
Test the voltage at the bonding connector. Results of the Test
The voltage potential must be between -0.500 mV and -0.800 mV.Note: A value near or greater than 0.0 mV is extremely corrosive.Measure the galvanic potential of the system and apply zinc or other less noble metal to divert corrosion. Contact your Cat dealer for more information.

Parts sheet Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.