SHELL AS 5261080 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     140-7742     Sleeve     3    
B     318-1491     Offset Wrench     1    
Illustration 1 g01411744
Attach Tooling (A) and suitable lifting devices to cab (16). The weight of cab (16) is approximately 1270 kg (2800 lb). Use Tooling (A) and the suitable lifting devices to position cab (16) onto the machine.
Illustration 2 g01411767
Connect harness assembly (18) .
Illustration 3 g01411746
Install bolts (17). Use Tooling (B) in order to install bolts (17) that are surrounded by the fuel tanks.Note: If you use Tooling (B), tighten bolts (17) to a torque of 548 68 N m (405 50 lb ft).
Illustration 4 g01411736
Position step assembly (15) and install bolts (14). Repeat this step for the opposite side of the machine.
Illustration 5 g01411727
Connect harness assemblies (13) and harness assemblies (12) .
Illustration 6 g01411723
Connect harness assembly (11) .
Illustration 7 g01411717
Connect ground strap (10) .
Illustration 8 g02731329
Position cover (9) and install bolts (8). Repeat this step for the opposite side of the machine.
Illustration 9 g01411515
Install clip (7), clip (6), and clips (5). Connect hose assemblies (4) .
Illustration 10 g01411507
Connect hoses (3). Connect harness assemblies (2) .
Illustration 11 g01411502
Install cover (1) .End By: Separate the steering frame lock.