AVSPARE.COM
parts catalog

SHIELD A 0005241 - Caterpillar



0005241 SHIELD A Caterpillar parts SHIELD
Rating:
51
Alternative (cross code) number:
CA0005241
000-5241
0005241
Caterpillar 0005241 SHIELD A
Weight: 9 pounds 4 kg.

Buy SHIELD A 0005241 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Table 1
Part Numbers    
Description     New Part Number     Former Part Number    
Guard     234-6001     112-6793    
Guard     234-6002     112-6794    
Guard     234-6003     110-2675    
Guard     234-6004     110-2676    
Shield
(1)     235-2337     157-6010    
Shield
(1)     235-2338     157-6013    
( 1 ) The former shields can be reworked in order to accept new fan guards. Replacement is not necessary.
( 1 ) The former shields can be reworked in order to accept new fan guards. Replacement is not necessary.Rework Procedure for Radiator Shield
The following procedure is used to modify the former radiator shields. The fan guard assemblies will directly bolt to the modified radiator shields. Replacement of the radiator shields is not necessary if these instructions are performed.
Do not attempt to disassemble or assemble this machine until you read and understand the disassembly and assembly instructions. Improper disassembly and assembly procedures could result in injury or death.
Personal injury or death can result from fumes, gases and ultraviolet rays from the weld arc.Welding can cause fumes, burn skin and produce ultraviolet rays.Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing area. Wear eye, ear and body protection before working.Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death.Read and understand the manufacturer's instructions and your employer's safety practices. Do not touch live electrical parts.See "American National Standard Z49.1, Safety in Welding and Cutting" published by the American Welding Society.American Welding Society
2501 N.W. 7th Street
Miami, Florida 33125
See "OSHA Safety and Health Standards, 29 CFR 1910", available from U.S. Department of Labor.U.S. Department of Labor
Washington, D.C. 20210
Table 2
Required Parts    
Item     Part Number     Description     Qty    
1     1F-0750     Weld Nut     2    
2     9B-7237     Bolt     2    
3     5P-1075     Hard Washer     2    Note: Only the two bottom radiator shields need any modification for the new fan guards.
Remove the two lower radiator shields from the machine. Refer to the Disassembly and Assembly manual for more information on this topic.
Illustration 1 g01018488
Bolt up the two lower fan guards to the two lower shields. This step uses the new guards as a template to drill the new holes.
Drill a 13 mm (0.512 inch) hole in location (A) and location (B) .
Weld in two nuts (1) to the back of shields in location (A) and location (B). Refer to Illustration 1.
Install the two lower radiator shields to the machine. Refer to the Disassembly and Assembly manual for more information on this topic.
Use bolts (2) and washers (3) to install new fan guard assemblies on the machine.


Parts shield Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.