SHIELD AS-MANIFOLD-LH 1265056 - Caterpillar

Install Aftercooler Core
1. Install new O-ring seals (1) in the aftercooler core.2. Put the aftercooler core (2) in position in the aftercooler base with the end marked "Fresh Water" to the water inlet end of the aftercooler base.
MARINE ENGINE3. Install a new O-ring seal on elbow (4). Put the adapter (6) and elbow (4) in position on the aftercooler base and install bolts (5).4. Connect line (3) to elbow (4) (if so equipped).5. Install the clips that hold pipe (7) to the timing gear cover.6. Install new O-ring seals on the elbow (8) and coupling (9).
INDUSTRIAL ENGINE7. Install adapter (8), elbow (9), four bolts, coupling (10) and pipe (11).8. Put the aftercooler cover in position on the aftercooler base and install the bolts that hold the cover to the base.9. Carefully turn the turbocharger compressor housing so the mark on the housing is in alignment with the mark on the turbocharger cartridge housing. Tighten the nut on the "V" clamp to a torque of 120 10 lb.in. (13.6 1.1 N m). Tighten the screw on the air cleaner clamp.
Do not cause damage to the O-ring seal between the turbocharger compressor housing and the cartridge housing.
10. Install the cover, four bolts (13) and nuts that connect air inlet pipe (12) to the aftercooler cover.11. Install coolant in the engine.end by: a) install instrument panel