SHIELD AS 1726040 - Caterpillar

Note: Machine movement is possible during main pump calibration.Monitor Procedure
Illustration 4 g06241517
Enter the "Service" menu on the monitor.
Enter password "9992".
Select "Calibration" menu.
Select "Electric-Hydraulic Valves".
Select "All Implements with Pump Pressure".
Follow the instruction on the monitor to complete the calibrations.
If an error occurs, attempt the calibration two more times. Note the error code, and refer to Table 2 and Table 3.If no error occurs, the calibration was complete successfully.ET Procedure
Select the ECM for "Machine Control".
Select "Calibrations" from the "Service" menu.
Select "Electric-Hydraulic Valves Calibrations".
Select "All Implements with Pump Pressure Calibrations".
Select "Start".
Follow the instruction on the monitor to complete the calibrations.
If no error occurs, the calibration was completed successfully.
Select the ECM for "Implement Control #2".
Select "Calibrations" from the "Service" menu.
Select "Electric-Hydraulic Valves Calibrations".
Select "All Implements with Pump Pressure Calibrations".
Select "Start".
Follow the instruction on the monitor to complete the calibrations.
If an error occurs, attempt the calibration two more times. Note the error code, and refer to Table 2 and Table 3.If no error occurs, the calibration was completed successfully.Troubleshooting - Error Codes
If the calibration fails with the same error code three times, refer to the following tables, and replace the affected solenoid.
Table 2
Calibration Error Codes
Out of Range Low Out of Range High Unstable
Boom Raise Valve #1 Minimum Current 0x1276 0x1277 0x1278
Boom Lower Valve #1 Minimum Current 0x1279 0x127A 0x127B
Boom Raise Valve #2 Minimum Current 0x127C 0x127D 0x127E
Stick In Valve #1 Minimum Current 0x127F 0x1280 0x1281
Stick In Valve #2 Minimum Current 0x1282 0x1283 0x1284
Stick Out Valve #1 Minimum Current 0x1285 0x1286 0x1287
Bucket Close Valve Minimum Current 0x1288 0x1289 0x128A
Bucket Open Valve Minimum Current 0x128B 0x128C 0x128D
Swing Right Valve Minimum Current 0x128E 0x128F 0x1290
Swing Left Valve Minimum Current 0x1291 0x1292 0x1293
Left Travel Forward Valve Minimum Current 0x1294 0x1295 0x1296
Left Travel Backward Valve Minimum Current 0x1297 0x1298 0x1299
Right Travel Forward Valve Minimum Current 0x129A 0x129B 0x129C
Right Travel Backward Valve Minimum Current 0x129D 0x129E 0x129F
Stick Unload Valve Minimum Current (1) 0x12A0 0x12A1 0x12A2
Swing Priority Valve Minimum Current (2) 0x12A3 0x12A4 0x12A5
Boom Float Solenoid Minimum Current (3) 0x12A6 0x12A7 0x12A8
Attachment Valve #1 Retract Minimum Current 0x12A9 0x12AA 0x12AB
Attachment Valve #2 Retract Minimum Current 0x12AC 0x12AD 0x12AE
Attachment Valve #3 Retract Minimum Current 0x12AF 0x12B0 0x12B1
Attachment Valve #4 Retract Minimum Current 0x12B2 0x12B3 0x12B4
Attachment Valve #5 Retract Minimum Current 0x12B5 0x12B6 0x12B7
Attachment Valve #1 Extend Minimum Current 0x12B8 0x12B9 0x12BA
Attachment Valve #2 Extend Minimum Current 0x12BB 0x12BC 0x12BD
Attachment Valve #3 Extend Minimum Current 0x12BE 0x12BF 0x12C0
Attachment Valve #4 Extend Minimum Current 0x12C1 0x12C2 0x12C3
Attachment Valve #5 Extend Minimum Current 0x12C4 0x12C5 0x12C6
(1) Error code can be associated with Stick Out or Stick Unload.
(2) Error code can be associated with Stick Out, Stick Unload, Swing Left, or Swing Priority.
(3) Error code can be associated with Stick Out, Stick Unload, Boom Raise #2, or Boom Float.
Table 3
Other Error Codes
Error Code
Implement Lockout Switch On 0x1042
Calibration Aborted by Tool/Monitor $0006
Implement Not in Hold Position 0x106A
Engine RPM too low 0x1074
Engine RPM Too High $10FC
Canceled by user request $0005