SHIELD AS 2163877 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock.
Release the hydraulic system pressure.
Illustration 1 g02445857
Disconnect harness assembly (1).
Illustration 2 g02446996
Disconnect hose (5).
Remove bolts (3) and wiper (2). Remove cap (4). Repeat this step for the other front wiper.
Illustration 3 g02447017
Illustration 4 g02447008
Support wiper motor assembly (6) inside of the cab. Remove clip (7), washer (8), nuts (9), washer (10), and washer (11). Installation Procedure
Install wiper motor assembly (6) in the reverse order of removal.
Tighten nuts (9) to a torque of 38 2 N m (28 1 lb ft).
Tighten bolts (3) to a torque of 14 2 N m (124 18 lb in).