SHIELD AS 2183183 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Pin 76.2 mm (3.0 inch) by 63.5 mm (2.5 inch) 1
B 1P-3532 Track Block Assembly 1
C 260-9412 Lifting Device 1
D 1U-9202 Lever Puller Hoist 1
Illustration 1 g06136592
Raise the lift arms and support the bucket in the raised position.
Release the track tension. Refer to Operation and Maintenance Manual, "Track - Check/Adjust"
Illustration 2 g01099092
Remove bolts (1) and (2) to remove guard assemblies (3).
Illustration 3 g06274889
Move the machine until the center of master link (4) is on the centerline of the final drive.
Illustration 4 g06274936
Illustration 5 g06274942
Position Tooling (B) to the lower section of track assembly (5). Attach Tooling (C) to the lower section of track assembly (5).
Remove bolts (6) and master shoe (7). Lower track assembly (5) to Tooling (B).
Illustration 6 g06274998
Attach Tooling (C) and Tooling (D) to track assembly (5).