2750562 SHIELD Caterpillar parts
24M
Rating:
Alternative (cross code) number:
CA2750562
275-0562
2750562
CA2750562
275-0562
2750562
Weight: 16 pounds 7 kg.
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
RV Awning Pitch Arm Black Replacement Overall Length of 31-5/8" Inch 2750572 2750562 375994 Fits Solera Regal 69" Awning Arm Assembly
TRAILERFIX Overall Length End to End of 31-5/8" || Center of mounting hole A to Center of Mounting Hole C 30-5/8" || Center of mounting hole A to Center of Mounting Hole B 29-3/8" || Durable Black Powder Coated 1/8" Steel Thickness || Fits Solera Regal 69" Awning Arm Assembly || Mounting Pin Hole Diameter 3/8"
TRAILERFIX Overall Length End to End of 31-5/8" || Center of mounting hole A to Center of Mounting Hole C 30-5/8" || Center of mounting hole A to Center of Mounting Hole B 29-3/8" || Durable Black Powder Coated 1/8" Steel Thickness || Fits Solera Regal 69" Awning Arm Assembly || Mounting Pin Hole Diameter 3/8"
$35.95
19 Feb 2020
-: -
Cobra Grips FIT Weight Lifting Gloves, Heavy Duty Straps, Alternative to Power Lifting Hooks, Power Lifting, for Deadlifts with Built in Adjustable Neoprene Padded Wrist Wrap Support.
(REGISTERED PATENT No. # 2750562 D752695) THE ONLY GEAR YOU NEED IN YOUR GYM BAG Replaces a grip pad, your lifting grips & power hooks || One SIZE Fits All With Adjustable Wrist Straps. Say Good BYE To WRIST WRAPS Our lifting grips have a built-in wrist support wrap for enhanced comfort || NO MORE SLIPS, NO MORE CHAFFING Provides ample padding to protect the palms & gives a tight grip || A TRULY COMFORTABLE FIT Fully adjustable 6mm neoprene gym glove alternative won't hold you back || PATENTED Ergonomically engineered with safety in mind; Maximum protection for the wrist
(REGISTERED PATENT No. # 2750562 D752695) THE ONLY GEAR YOU NEED IN YOUR GYM BAG Replaces a grip pad, your lifting grips & power hooks || One SIZE Fits All With Adjustable Wrist Straps. Say Good BYE To WRIST WRAPS Our lifting grips have a built-in wrist support wrap for enhanced comfort || NO MORE SLIPS, NO MORE CHAFFING Provides ample padding to protect the palms & gives a tight grip || A TRULY COMFORTABLE FIT Fully adjustable 6mm neoprene gym glove alternative won't hold you back || PATENTED Ergonomically engineered with safety in mind; Maximum protection for the wrist
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2750562:
Information:
Problem: The two-section gear pump makes noise and the cylinder rods do not move evenly. Also, there are air bubbles in the oil.
Probable Cause
At least one hoist relief valve opens at low oil pressure.
There is a loose connection in the oil line on the inlet side of the two-section gear pump.
The two-section gear pump is too worn.Problem: The temperature of the oil is too hot.
Probable Causes
The viscosity of the oil is incorrect.
At least one hoist relief valve opens at low oil pressure.
The two-section gear pump is too worn.
The brake cooling pump section for the pulled unit on the four-section gear pump is too worn. ( 784B)
There is a restriction in an oil passage.
The load on the system is too high.Problem: The output of the pump is too low.
Probable Cause
The hydraulic tank oil level is too low.
The viscosity of the oil is incorrect.
The two-section gear pump is too worn.
The brake cooling pump section for the pulled unit on the four-section gear pump is too worn. ( 784B)Problem: The pressure of the oil is too low.
Probable Cause
At least one hoist relief valve opens at low oil pressure.
The two-section gear pump is too worn.
The brake cooling pump section for the pulled unit on the four-section gear pump is too worn. ( 784B)
An O-ring seal failed in the hydraulic system.
Probable Cause
At least one hoist relief valve opens at low oil pressure.
There is a loose connection in the oil line on the inlet side of the two-section gear pump.
The two-section gear pump is too worn.Problem: The temperature of the oil is too hot.
Probable Causes
The viscosity of the oil is incorrect.
At least one hoist relief valve opens at low oil pressure.
The two-section gear pump is too worn.
The brake cooling pump section for the pulled unit on the four-section gear pump is too worn. ( 784B)
There is a restriction in an oil passage.
The load on the system is too high.Problem: The output of the pump is too low.
Probable Cause
The hydraulic tank oil level is too low.
The viscosity of the oil is incorrect.
The two-section gear pump is too worn.
The brake cooling pump section for the pulled unit on the four-section gear pump is too worn. ( 784B)Problem: The pressure of the oil is too low.
Probable Cause
At least one hoist relief valve opens at low oil pressure.
The two-section gear pump is too worn.
The brake cooling pump section for the pulled unit on the four-section gear pump is too worn. ( 784B)
An O-ring seal failed in the hydraulic system.
Caterpillar parts catalog:
Parts shield Caterpillar catalog:
8Y6385
SHIELD-STRIKER
24H, 24M, 30/30, 301.5, 302.5, 303.5, 304.5, 5130B, 5230, 5230B, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 772, 902, 906, 908, 953D, 963D, 973D, DEUCE, RM-300, RM-500
24H, 24M, 30/30, 301.5, 302.5, 303.5, 304.5, 5130B, 5230, 5230B, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 770, 772, 902, 906, 908, 953D, 963D, 973D, DEUCE, RM-300, RM-500
2823379
SHIELD
24M
24M
2823379
SHIELD
24M
24M
2405919
SHIELD-HEAT
140H, 143H, 14H, 160H, 163H
140H, 143H, 14H, 160H, 163H
2434197
SHIELD AS
Caterpillar
Caterpillar