SHIELD AS-HEAT 2860350 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01019031
Remove pressure plug (1) and drain fuel into a suitable container for storage or disposal.
Illustration 2 g01019035
Typical example
Use Tooling (A) to remove fuel filter (6) .
Disconnect the sensor harness assembly from fuel temperature sensor (2) .
Remove fuel temperature sensor (2) .
Disconnect hose assembly (3). Plug all openings immediately.
Remove bolts (4) .
Remove fuel filter base (5) and the O-ring seals.
Remove the mounting stud for the fuel filter from the fuel filter base, if necessary.