SHIELD GP-EXHAUST 3171708 - Caterpillar

Illustration 1 g00611737
ECM Display Showing Mode 2
Enter calibration mode (mode 2) of the ECM. To do so, press and hold the "MODE SCROLL" switch. Release the switch when "-2-" is showing in the display area.
Enter calibration c03 (FRONT position calibration). To do so, press and hold the "INCREMENT" switch. Release the switch when "c03" is showing on display.
Move the steering mode switch to the FRONT position.
Store the value of the signal currently being sent from the steering mode switch position sensor. To do so, press and hold the "CLEAR/store" switch. While the switch is pressed the yellow indicator will briefly turn off or the red indicator will briefly flash on. Observe the status of the yellow and red indicators while the switch is in the