SHIELD AR-THERMO 3254761 - Caterpillar

Illustration 1 g00950913
Illustration 2 g00950914
Table 1
Model     Description     Item     Former Part Number     New Part Number    
950G, 962G and IT62G     Housing     1     114-9038     186-3402    
966G and 972G     Manifold Assembly     3     116-6654     186-2460    
Gear 2     115-5569     186-2461    The new parts are adaptable to the transmissions in the machines that are listed. These transmissions were originally equipped with intermediate speed sensors. The power train software must be upgraded if the new parts are used. Use at least 192-9953 Power Train Software with the new parts. Newer versions of the power train software will have a higher part number. The new parts are a direct replacement for the former parts. The existing wiring for the speed sensor should be tied out of the way if a new housing or a new manifold is used. The existing speed sensor may be left installed into the existing housing or the existing manifold if the gear is the only part that is replaced. The wiring may be left connected to the sensor if the gear is the only part that is being replaced.