SHIELD GP-FUEL 3814956 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the engine oil from the engine into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil - Change".
Illustration 1 g00590117
Remove bolts (1) that hold the adapter of the engine oil pump to the engine oil pan.
Illustration 2 g01254661
Typical example
Remove bolts (2) that hold engine oil pan (3) to the engine.
Lift the engine off the engine oil pan. The engines have the following weights:
G3508 Engines weigh approximately 4300 kg (9500 lb).
G3512 Engines weigh approximately 5443 kg (12000 lb).
G3516 Engines weigh approximately 6440 kg (14200 lb).
The engine oil pans have the following weights:
G3508 engine oil pan weighs approximately 295 kg (650 lb).
G3512 engine oil pan weighs approximately 364 kg (800 lb).
G3516 engine oil pan weighs approximately 393 kg (865 lb).