SHIELD ASSEM. (Lower R.H.) 3A4462 - Caterpillar

3A4462 SHIELD ASSEM. (Lower R.H.) Caterpillar parts 941, 951B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3A4462
3A-4462
3A4462

Caterpillar 3A4462 SHIELD ASSEM. (Lower R.H.)

Buy SHIELD ASSEM. (Lower R.H.) 3A4462 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Compatible equipment models: 3A4462:

TRACK LOADER 941 951B Caterpillar

Number on catalog scheme: 20

Caterpillar 3A4462 Parts scheme SHIELD ASSEM. (Lower R.H.)

For full view, you need register

Information:

Removal Procedure
Start By:
Disconnect the crankcase breather or remove the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01788614
If the valve mechanism cover is equipped with a heat shield, remove bolts (1) and washers (3) from heat shield (2). Note: The washers are two different sizes. Note the position of the washers for installation purposes.
Remove heat shield (2).
Illustration 2 g01788720
Typical example
Remove bolts (4) and bolts (5) from valve mechanism cover (6).
Remove valve mechanism cover (6) from the valve mechanism cover base.
Remove gasket (7) from valve mechanism cover (6). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the valve mechanism cover. Clean the faces of the valve mechanism cover base.
Illustration 3 g01788720
Typical example
Install a new gasket (7) to valve mechanism cover (6). Note: Ensure that the gasket is fully seated into the groove of the valve mechanism cover.
Illustration 4 g01788815
Typical example
Ensure that harness assemblies (9) are not in contact with the rocker arms or in contact with the valve mechanism cover base. Position valve mechanism cover (6) onto valve mechanism cover base (8). Ensure that harness assemblies (9) are not trapped during the assembly procedure. Install bolts (4) and bolts (5).
Illustration 5 g01245162
Tightening sequence for the valve mechanism cover
Tighten bolts (4) and bolts (5) in the numerical sequence that is shown in Illustration 5. Tighten the bolts to a torque of 6 N m (53 lb in).
Illustration 6 g01788614
If necessary, position heat shield (2) onto the valve mechanism cover.
Install bolts (1) and washers (3). Tighten the bolts to a torque of 9 N m (80 lb in). End By:
Connect the crankcase breather or install the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

951C TRAXCAVATOR 69H03678-03678 (MACHINE) POWERED BY 3304 ENGINE

4N-8730: RADIATOR GROUP » c157232

941 TRAXCAVATOR 70H04264-UP (MACHINE) POWERED BY 3304 ENGINE

4N-8765: RADIATOR GROUP » c207797

Parts shield Caterpillar catalog:

6N7174 SHIELD-OIL
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215C, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, ...