3C8519 SHIELD AS Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8519
3C-8519
3C8519
CA3C8519
3C-8519
3C8519
Weight: 2 pounds 1 kg.
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01194841
Disconnect harness assembly (2) .
Remove engine oil temperature sensor (1) .
Remove the O-ring seal from engine oil temperature sensor (1) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01194841
Install a new O-ring seal on engine oil temperature sensor (1) .
Install engine oil temperature sensor (1) and tighten to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly (2) .
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01194841
Disconnect harness assembly (2) .
Remove engine oil temperature sensor (1) .
Remove the O-ring seal from engine oil temperature sensor (1) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01194841
Install a new O-ring seal on engine oil temperature sensor (1) .
Install engine oil temperature sensor (1) and tighten to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly (2) .