SHIELD AS 4351341 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-1863     Retaining Ring Pliers     1    
Illustration 1 g01122848
Lower stabilizer assembly (1) .
Illustration 2 g01122850
Illustration 3 g01122851
Illustration 4 g01122852
Remove all mounting hardware from harness assembly (4) and hose assemblies (2) and (3) .
Illustration 5 g01122855
Attach a suitable lifting device to stabilizing cylinder (6). The weight of stabilizing cylinder (6) is approximately 91 kg (200 lb). Use Tooling (A) in order to remove retaining ring (5). Remove pin (7) .
Illustration 6 g01122857
Position stabilizing cylinder (6) onto suitable blocking and secure stabilizing cylinder (6) .
Illustration 7 g01122858
Attach a suitable lifting device to stabilizer assembly (1). The weight of stabilizer assembly (1) is approximately 125 kg (275 lb). Remove bolt (8). Remove pin assembly (9). Remove stabilizer assembly (1) .
Illustration 8 g01122861
Remove seals (10) and bearings (11). Repeat for the remaining seals and bearings.
Illustration 9 g01122869
Attach a suitable lifting device to stabilizer assembly (1). Use Tooling (A) in order to remove retaining ring (12). Remove pin (14). Raise stabilizer assembly (1) from pad assembly (13) .
Repeat Step 1 through Step 7 for the opposite side.