SHIELD AS 4351354 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A    1P-1863     Retaining Ring Pliers    1    
B     123-3804     Adapter     1    
9U-6832 Nut     1    
4C-9634 Puller Stud     1    
6V-3175 Double Acting Cylinder     1    
3S-6224 Electric Hydraulic Pump Gp     1    
C     1P-0510     Driver Gp     1    
Illustration 1 g01122869
Attach a suitable lifting device to stabilizer assembly (1) and position stabilizer assembly (1) into pad assembly (13). The weight of stabilizer assembly (1) is approximately 125 kg (275 lb). Install pin (14). Use Tooling (A) in order to install retaining ring (12) .
Illustration 2 g01122861
Illustration 3 g01123307
Use Tooling (B) in order to install bearings (11). Use Tooling (C) (not shown) in order to install seals (10). Repeat for the remaining seals and bearings.Note: Install bearings (11) so that bearings (11) are flush against the lip that is inside the bore.
Illustration 4 g01122858
Attach a suitable lifting device to stabilizer assembly (1) and position stabilizer assembly (1). Install pin assembly (9) and bolt (8) .
Illustration 5 g01122857
Illustration 6 g01122855
Attach a suitable lifting device to stabilizing cylinder (6) and remove stabilizing cylinder (6) from the suitable blocking. Position stabilizing cylinder (6). The weight of stabilizing cylinder (6) is approximately 91 kg (200 lb). Install pin (7). Use Tooling (A) in order to install retaining ring (5) .
Illustration 7 g01122852
Illustration 8 g01122851
Illustration 9 g01122850
Install all mounting hardware to hose assemblies (2) and (3) and harness assembly (4) .
Repeat Step 1 through Step 5 for the opposite side.